JURAPOM® X60 724 NC00 1000

Identification & Functionality

Chemical Family

Waxes

Polymer Name

Polyacetal Homopolymer (POM)

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyacetals

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Modulus	2750	MPa	ISO 527-2
Young Modulus	3000	MPa	ISO 527-2
Tensile Strength at Break	45	MPa	ISO 527-2
Tensile Strength at Yield	25	Mpa	ISO 527-2
Elongation at Break	30	%	ISO 527-2
Elongation at Yield	1.55	%	ISO 527-2
Flexural Modulus	4000	Mpa	ISO 178
Flexural Strength	55	Mpa	ISO 178
Izod notched impact (23°C)	5.5	kJ/m2	ISO 180/1A
Izod notched impact (-30°C)	4.5	kJ/m2	ISO 180/1U

Typical Properties

	Value	Units	Test Method / Conditions
Density	1.53	g/cm3	ISO 1183
Ash Content	20	%	ISO 3451
Water Absorption (Saturation in water 23°C)	0.65	%	ISO 62
Water absorption,(Equilibrium value) (50% RH, 23°C)	0.2	%	ISO 62

Thermal Properties

	Value	Units	Test Method / Conditions
MFR/MFI(Melt Flow Rate,250 °C 2,16 kg)	10-13	g/10 min	ISO 1133
VICAT (50 N - 50 °C/h)	143	°C	ISO 306
HDT A (1.80 Mpa)	90	°C	ISO 75-2
HDT B (0.45 Mpa)	129	°C	ISO 75-2

Processing Properties

	Value	Units	Test Method / Conditions
Melting Temperature, DSC	165	°C	ISO 11357-1/-3
Melt Temperature, for processing	190-200	°C	—
Cylinder Settings	180-210	°C	—
Screw Design	Universal Type	—	—
Mould Temperature, injection moulding	80-120	°C	—
Moulding shrinkage (parallel,2mm)	1.7	%	ISO 294-4
Moulding shrinkage (normal,2mm)	1.7	%	ISO 294-4

Electrical Properties and Flammability

	Value	Units	Test Method / Conditions
Flame Rating (1.6 mm)	HB	class	UL94
Comparative Tracking Index (CTI, 3 mm-Solution A)	600	V	IEC 60112
Volume Resistivity	1.00E+12	Ohm.m	IEC 60093
Surface Resistivity	100000000000000	ohm	IEC 60093