JURAPOM® X62 001 NC00 4023

Identification & Functionality

Chemical Family

Waxes

Polymer Name

Polyacetal Homopolymer (POM)

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyacetals

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Modulus	1700	MPa	ISO 527-2
Young Modulus	2000	MPa	ISO 527-2
Tensile Strength at Break	45	MPa	ISO 527-2
Tensile Strength at Yield	30	Mpa	ISO 527-2
Elongation at Break	min. 10	%	ISO 527-2
Elongation at Yield	2,0	%	ISO 527-2
Flexural Modulus	2150	Mpa	ISO 178
Flexural Strength	70	Mpa	ISO 178
Charpy notched (23°C)	6,0	kJ/m2	ISO 179
Charpy notched (-30°C)	5,5	kJ/m2	ISO 179
Izod notched impact (23°C)	4,5	kJ/m2	ISO 180/1A
Izod unnotched impact (-30°C)	4,0	kJ/m2	ISO 180/1U

Typical Properties

	Value	Units	Test Method / Conditions
Density	1.52	g/cm³	ISO 1183
Water Absorption (Saturation in water 23°C)	0,60	%	ISO 62
Water absorption,(Equilibrium value) (50% RH, 23°C)	0,18	%	ISO 62

Thermal Properties

	Value	Units	Test Method / Conditions
MFR/MFI(Melt Flow Rate) (190 °C 2,16 kg)	5 - 12	g / 10 min	ISO 1133
VICAT (50 N - 50 °C/h)	145	°C	ISO 306
HDT A (1.80 Mpa)	86	°C	ISO 75-2
HDT B (0.45 Mpa)	126	°C	ISO 75-2
Coeff.of linear therm expansion	13,0	E-5/oC	ISO 11359

Processing Properties

	Value	Units	Test Method / Conditions
Melting Temperature, DSC	165	°C	ISO 11357-1/-3
Melt Temperature, for processing	180 - 210	°C	—
Cylinder Settings	180 - 230	°C	—
Screw Design	Universal Type	—	—
Mould Temperature, injection moulding	40 - 60	°C	—
Moulding shrinkage (parallel,2mm)	2,0	%	ISO 294-4
Moulding shrinkage (normal,2mm)	2,0	%	ISO 294-4

Electrical Properties and Flammability

	Value	Units	Test Method / Conditions
Flame Rating (1.6 mm)	HB	class	UL94
Volume Resistivity	1.00E+14	Ohm.m	IEC 60093
Surface Resistivity	10000000000000000	ohm	IEC 60093