Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- Special formula designed for artificial marble and casting applications
- Low volumetric shrinkage
- Good casting color, good resin color
- Good fill wetting
- High filling rate
- Product with high deformation resistance
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications & Usage
Polipol 353 polyester is suitable for the production of products such as artificial marble countertops (marble), sinks, sinks and shower trays by casting method, with the addition of 70-80% filler (dolomite, calcite, aluminum hydroxide quartz). However; non-transparent statuette, key chain, etc. It can also be used in the manufacture of souvenirs. Sample artificial marble formula is given below. Workshop conditions and product to be poured. According to its characteristics, the filling rate can exceed 80%.
Sample Artificial Marble Formula (Marble)
%
Polijel 213 gelcoat
Film (400-1000 micron)
Polipol 353
29.30
Calcite/dolomite
68.37
Cobalt, 6%
0.03
Mek-P
0.30
Pigment Paste
2.00
Total
100.00
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| View | Transparent | — | — |
| Color | Max. 100 | Hazen | — |
| Density | 1125 | gr/cm3 | ISO 1675 |
| Viscosity (23°C) with a Brookfield DV3T Rheometer | 600-800 | cP | ISO 2555 |
| Monomer Ratio | 35-38 | % | IT 012 |
| Acid Index | 20 | mg KOH/g | ISO 2114 |
| Gel Time (23°C 100 gr. 1 ml to the resin) | 9 - 12 | min | IT 004 |
| HDT (1.82, 0.45) | 61, 70 | °C, MPa | ISO 75-A |
| Tensile Strength | 61 | MPa | ISO 0527 |
| Modulus of Elasticity, | 3434 | MPa | ISO 0527 |
| Modulus of Elasticity, | 4200 | MPa | ISO 0178 |
| Elongation at Tensile | 2.6 | % | ISO 0527 |
| Flexural Strength | 115 | MPa | ISO 0178 |
| Elongation at Break Bending | 3 | % | ISO 0178 |
| Izod Impact Resistance | 13 | kJ/m² | ISO 0180 |
| Barcode Hardness | 47 | — | ASTM-D 2583 |
| Volumetric Tensile | 7.6 | % | ISO 3521 |
| Water Absorption | 0.155 | % | ISO 0062 |
Storage & Handling
- Shelf Life
- 6
- Storage & Handling Conditions
The resin should be stored in its original unopened and undamaged packaging in a closed environment, in a dry environment, below 23°C. If the resin temperature drops below 18°C, it must be heated to at least 18°C before use. Compliance with local and national regulations must be ensured when storing and handling flammable liquids. Changes in properties can be observed depending on the storage temperature. Shelf life decreases at high temperatures. Since the resin contains styrene monomer, its shelf life is reduced when exposed to direct sunlight. Store in the dark and in its 100% lightproof packaging.
Avoid contact with food, drink or food items. Take precautions against static electricity generation. Use only in well ventilated areas. Keep away from open heat, flame, spark. Avoid contact with eyes, skin, clothing. Do not spill into the environment. Dispose of waste according to local and national regulations. Use personal protective equipment during use. Always keep the packaging cover closed. Avoid contact with steam by providing adequate ventilation in the work area. Its empty packaging is subject to the same classification as the product.