Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Main Characteristics
- Non-treated side heat-sealable from 115°C;
- Surface treatment on inner or outer layer;
- Excellent optical properties (gloss and transparency).
- Transparent BOPP film
- Heat-sealable
- High-intensity surface treatment for printing or lamination
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
Properties
- Physical Form
- Mechanical Properties
- Physical Properties
- Optical Properties
- Dimensional Specifications
Width Minimum: 0 mm | Maximum: 2 mm (from standard width)
Outer Diameter* Minimum: 30 mm | Maximum: 20 mm (from standard diameter)
Core Minimum: 1 mm | Maximum: 1 mm (from standard diameter)
Splices per roll Maximum: 2 % of Splices per order Maximum: 30%
Value | Units | Test Method / Conditions | |
Tensile Strength (MD) | 140.0 | N/mm² | ASTM D 882 |
Tensile Strength (TD) | 270.0 | N/mm² | ASTM D 882 |
Elongation at Break (MD) | 170.0 | % | ASTM D 882 |
Elongation at Break (TD) | 50.0 | % | ASTM D 882 |
Shrinkage (MD) | 3.0 | % | ASTM D 1204 |
Shrinkage (TD) | 1.0 | % | ASTM D 1204 |
Sealing Range (Non Treated Layer) | 115 - 130 | °C | ASTM F 88 |
Sealing Strength (Non Treated Layer) | min. 400 | gf/in | ASTM F 88 |
Value | Units | Test Method / Conditions | |
Nominal Thickness | 23.8 - 26.3 | µm | DIN 53370 |
Yield | 42.1 - 46.5 | m²/kg | ASTM D 4321 |
Unit Weight | 21.5 - 23.8 | g/m² | ASTM D 4321 |
Surface Treatment (Treated Layer) | min. 38 | - | - |
Coefficient of Friction (Non Treated Layer) | 0.18 - 0.45 | - | - |
Value | Units | Test Method / Conditions | |
Gloss (45°) | min. 90 | % | ASTM D 1003 |
Haze | max. 2 | u.b | ASTM D 2457 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Food Contact Regulations
SEAL Family films comply with Mercosul, ANVISA, FDA (Food and Drug Administration) and the European Community legislations for applications involving direct contact with food. Full details are provided in the Declaration of Conformity. Customers intending to use SEAL Family films for applications intended to come into contact with food should request a copy of that document from POLO Films.
Storage & Handling
- Storage
All products are stored and transported in dry, covered and clean environments. It is recommended that storage and transportation take place at temperature around 30°C and 60% relative humidity. If the temperature and humidity are not as recommended, the following issues may occur:
- Decreased level of surface treatment, leading to printing and/or lamination difficulties
- Decreased film transparency
- Too low CoF, making processing and machinability difficult.
BOPP films are recommended to be kept at operating room temperature for 24 hours before use.
- Shelf Life
6 months