Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Main Characteristics
- Both sides heat-sealable, non-treated side from 105°C
- Surface treatment on inner or outer layer
- Optimum optical properties (gloss and transparency
- Transparent BOPP film
- Heat-sealable
- Surface treatment for printing and/or lamination
- Stable and controlled CoF at high temperatures
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Typical Applications
- Flexible packaging for food: cookies, snacks, instant noddle and product grouping packaging
- Non-food flexible packaging: monolayers or laminate
- Developed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.
Properties
- Physical Form
- Mechanical Properties
- Physical Properties
- Optical Properties
- Barrier Properties
- Dimensional Specifications
Width Minimum: 0 mm | Maximum: 2 mm (from standard width)
Outer Diameter* Minimum: 30 mm | Maximum: 20 mm (from standard diameter)
Core Minimum: 1 mm | Maximum: 1 mm (from standard diameter)
Splices per roll Maximum: 2 % of Splices per order Maximum: 30%
| Value | Units | Test Method / Conditions | |
| Tensile Strength (MD) | 140.0 | N/mm² | ASTM D 882 |
| Tensile Strength (TD) | 250.0 | N/mm² | ASTM D 882 |
| Elongation at Break (MD) | 180.0 | % | ASTM D 882 |
| Elongation at Break (TD) | 45.0 | % | ASTM D 882 |
| Shrinkage (MD) | 3.0 | % | ASTM D 1204 |
| Shrinkage (TD) | 1.0 | % | ASTM D 1204 |
| Sealing Range (Non Treated Layer) | 105 - 130 | °C | ASTM F 88 |
| Sealing Strength (Non Treated Layer) | min. 300 | gf/in | ASTM F 88 |
| Value | Units | Test Method / Conditions | |
| Nominal Thickness | 16.2 - 17.9 | µm | DIN 53370 |
| Yield | 61.9 - 68.4 | m²/kg | ASTM D 4321 |
| Unit Weight | 14.6 16.2 | g/m² | ASTM D 4321 |
| Surface Treatment (Treated Layer) | min. 38 | — | — |
| Coefficient of Friction (Non Treated Layer) | 0.22 - 0.28 | — | — |
| Value | Units | Test Method / Conditions | |
| Gloss (45°) | min. 85 | % | ASTM D 1003 |
| Haze | max. 3 | u.b | ASTM D 2457 |
| Value | Units | Test Method / Conditions | |
| TPVA (38°C / 90%UR) | max. 10 | g H2O / (m².dia) | ASTM F 1249 |
| WVTR (100°F / 90%RH) | max. 0.64 | gH2O/(100in².day) | ASTM F 1249 |
| TPO2 (23°C / 0%UR) | max. 3800 | cm³ O2 / (m².dia) | ASTM D 3985 |
| OTR (73°F / 0%RH) | max. 244 | cm³O2 / (100in².day) | ASTM D 3985 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Food Contact Regulations
SEAL Family films comply with Mercosul, ANVISA, FDA (Food and Drug Administration) and the European Community legislations for applications involving direct contact with food. Full details are provided in the Declaration of Conformity. Customers intending to use SEAL Family films for applications intended to come into contact with food should request a copy of that document from POLO Films.
Storage & Handling
- Storage
All products are stored and transported in dry, covered and clean environments. It is recommended that storage and transportation take place at temperature around 30°C and 60% relative humidity. If the temperature and humidity are not as recommended, the following issues may occur:
- Decreased level of surface treatment, leading to printing and/or lamination difficulties
- Decreased film transparency
- Too low CoF, making processing and machinability difficult.
- BOPP films are recommended to be kept at operating room temperature for 24 hours before use.
- Shelf Life
6 months