Polo Films TSY.L82 18TSYL82 - BOPP Film

Knowde Enhanced TDS

Identification & Functionality

Features & Benefits

Materials Features: Good Optical Properties,
Heat Sealable
Main Characteristics: Both sides heat-sealable, non-treated side from 82°C

Surface treatment on inner or outer layer

Excellent optical properties (gloss and transparency)

Excellent performance in horizontal form-fill-seal and wrap-around packing machines

Transparent BOPP film

Heat-sealable at low initial temperature

Surface treatment for printing and/or lamination

Applications & Uses

Markets: Printing & Packaging
Applications: Printing & Packaging — Packaging
Food & Beverage Packaging,
Industrial & Transport Packaging,
Other Packaging Materials
Plastics & Elastomers End Uses: Film,
Flexible Packaging,
Food Packaging,
Form Fill Seal Packaging
Typical Applications: Non-food flexible packaging: A4 sheet reams

Provides increased productivity for filling or packing processes owing to decreased sealing time

Developed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling or high-speed packing processes.

Properties

Physical Form: Film
Dimensional Specifications: Width
Minimum: 0 mm | Maximum: 2 mm (from standard width)

Outer Diameter*
Minimum: 30 mm | Maximum: 20 mm (from standard diameter)

Core
Minimum: 1 mm | Maximum: 1 mm (from standard diameter)

Splices per roll Maximum: 2

% of Splices per order Maximum: 30%

Regulatory & Compliance

Certifications & Compliance: FDA Compliant
Chemical Inventories: Anvisa Compliant (Brazil)
Food Contact Regulations: SEAL Family films comply with Mercosul, ANVISA, FDA (Food and Drug Administration) and the European Community legislations for applications involving direct contact with food. Full details are provided in the Declaration of Conformity. Customers intending to use SEAL Family films for applications intended to come into contact with food should request a copy of that document from POLO Films.

Storage & Handling

Storage: All products are stored and transported in dry, covered and clean environments. It is recommended that storage and transportation take place at temperature around 30°C and 60% relative humidity. If the temperature and humidity are not as recommended, the following issues may occur:

Decreased level of surface treatment, leading to printing and/or lamination difficulties

Decreased film transparency

Too low CoF, making processing and machinability difficult.

BOPP films are recommended to be kept at operating room temperature for 24 hours before use.
Shelf Life: 6 months

Width	Minimum: 0 mm \| Maximum: 2 mm (from standard width)
Outer Diameter*	Minimum: 30 mm \| Maximum: 20 mm (from standard diameter)
Core	Minimum: 1 mm \| Maximum: 1 mm (from standard diameter)
Splices per roll	Maximum: 2
% of Splices per order	Maximum: 30%