Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
Features & Benefits
- Performance
The action of SUSPENO 70 is not dependent on pigment reactivity nor does it relate to temperature, vehicle acidity, soaps, special solvent or surfactants. Being adsorbed on particle surfaces it prevents agglomeration and settling. SUSPENO 70 does not significantly alter apparent viscosity in the mid-shearing range such as observed in the Stormer viscometer and effluent cups (Ford, Shell, Zahn). It does increase viscosity in the ultra low shear range (.05 to 1.0 reciprocal seconds). This is an important factor in industrial coatings, which, because of high solids requirements, cannot tolerate a major viscosity increase.Slight pigment settling is generally tolerated so long as the system can be easily reconstituted. Highly undesirable caking and hard packing are avoided by the use of SUSPENO 70.Sag control is achieved by reason of SUSPENO 70’s high viscosity in the ultra low shear range. Its efficiency is readily demonstrated by adding it to paint at a test level of 5-7 pound per one hundred gallons. After thorough mixing (10-12 minutes) the paint can be brushed on a horizontal surface, scribed with a blunt point (pencil eraser) and them placed in a vertical position to observe sag correction.SUSPENO 70 is effective in a wide range of pigmented vehicles; oils, varnishes, alkyds, alkyd/amino systems, esters, polyurethane’s, cellulosic and acrylic lacquers, chlorinated rubber and vinyl. The normal solvents: aliphatic, aromatic and oxygenated are generally suitable.
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Coating Type
- Industrial Additives End Use
- Ink & Toner Type
- Applications
- Architectural Paints, Wood Stains and Primers
- Industrial Coatings and Product Finishes
- Maintenance and Marine Coatings
- Traffic Paints
- Pigmented Lacquers
- Inks and Adhesives
- Putty, Caulks, Sealants
- Mastic and Trowel Compounds
- Asphaltic and Bituminous Compound
- Processing
SUSPENO 70 can be added at any stage of production using conventional dispersion equipment. For correction of off-standard batches or reworking old material in storage, the stir-in principle is adequate. Through mixing for 10-12 minutes is suggested. There are not temperature restrictions governing the use of SUSPENO 70.
- Use Level
SUSPENO 70 is generally used in the range of 0.4% to 1.2% based on total weight. Preliminary evaluation is suggested at five-seven per 100 gallons.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.04 | gm/cm3 | — |
| Bulking Value | 0.115 | gallons/lbs. | — |