Products

Polygem 519 High Temperature Ceramic Tile Adhesive is our industry standard epoxy tile adhesive for use in environments up to 400°F. The Polygem 519 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The #519 is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 519 is moisture resistant and will even cure underwater.

Polygem 1325 Brushable Ceramic Epoxy Coating is a brushable epoxy coating specially blended with abrasion resistant ceramic fillers to provide a durable barrier to protect surfaces subjected to wear and abrasion. Polygem 1325 is easy and apply by brush to most surfaces. Polygem 1325 is waterproof and resistant to most chemicals and solvents. Polygem 1325 is a thick and creamy epoxy coating will allow for vertical and overhead application.

Polygem Sinmast 4 Rapid is a fast-setting, fast-curing industrial epoxy formulated for concrete patching and repair. Mix Polygem Sinmast 4 Rapid with sand or aggregates to make epoxy grouts. Polygem Sinmast 4 Rapid is also an excellent choice for fiberglass lay up and laminating applications. Polygem Sinmast 4 Rapid does not contain solvents or toxic styrenes.

Polygem Aqua Gem Water Based Epoxy Primer is a water-based epoxy coating specially formulated for use as a hard coat for polystyrene and urethane foam surfaces. Aqua-Gem can be mixed with sand to create a thicker and very solid impact-resistant surface. Aqua-Gem’s unique water base formulation allows for ease of application over other hard coatings. When thickened with the Polygem Thickening Agent the Aqua-Gem will not stick to a trowel like other epoxy formulations. Aqua-Gem is ideal for use on damp and porous surfaces and can be used as a primer on hard to bond to surfaces. Add extra water to Aqua-Gem to use as a deep penetrating sealer for porous surfaces.

Polygem 2089 Fast Set Epoxy Coating is a fast-curing, epoxy resin specially formulated for use as a base-coat in quartz broadcast seamless flooring applications which will allow for a double broadcast or top-coating in a little as 2 hours. Polygem 2089 Fast Set Epoxy Coating is an easy to mix 2 to 1 by volume ratio and it’s low viscosity allows for easy to spread thin-coat applications. Polygem 2089 Fast Set Epoxy Coating is ideal for small areas or areas of critical service that demand a prompt return to service. Polygem 2089 Fast Set Epoxy Coating is resistant to most chemicals and solvents. Polygem 2089 Fast Set Epoxy Coating is non-blushing and the resin system of choice for cool/humid floors. Polygem 2089 Fast Set Epoxy Coating when mixed with clean dry silica sand, is also ideal for use as an epoxy mortar or grout for fast-track repairs and even cold weather applications.

Polygem 580FS Fast Set Tile Adhesive is a specially formulated epoxy paste to provide a fast setting patching compound for immediate protection of surfaces subject to wear and abrasion. Polygem 580FS is an easy to mix 1 to 1 by volume ratio and will cure in as little as 15 minutes. Polygem 580FS is ideal for emergency repairs and will minimize down-time of critical equipment and process lines. Polygem 580FS is waterproof and resistant to most chemicals and solvents. Polygem 580FS is a thick non-sag paste compound that will allow for vertical and overhead patching.

Polygem 307 Ceramic Tile Adhesive is our industry standard epoxy tile adhesive. The 307 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The Polygem 307 Ceramic Tile Adhesive is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 307 Ceramic Tile Adhesive is moisture resistant and will even cure underwater.

Polygem 1004 Fast Set Wearing Compound is a very fast setting epoxy paste specially formulated for the sealing of cracked concrete prior to injection with epoxy or urethane resin systems. Polygem 1004 Fast Set Wearing Compound is an easy to mix 1 to 1 by volume ratio and will be ready for injection in as little as 35 minutes. is the preferred epoxy for use in occupied areas such as residential or institutional work areas. Polygem 1004 Fast Set Wearing Compound is a thick non-sag paste compound that will allow for vertical and overhead patching.

Polygem Aquaseal is a water-based epoxy vapor block / primer specially formulated for use as a surface primer for seamless flooring applications to provide superior adhesion of epoxy, urethane, and cementitious topcoats. Deeply penetrates concrete surfaces to provide a permanent and tenacious bond. Ideal for use on damp and porous concrete surfaces. Aqua-Seal is resistant to most chemicals and solvents. Excellent for new concrete.

Sinmast 501 is a 100% solids, flexibilized two-part epoxy joint filler specifically formulated to meet the punishing demands of today’s industrial floors. Sinmast 501 is used to fill and repair joints and cracks subjected to hard wheeled traffic and will provide for a flexible and durable surface. It is flexible, resilient and will help protect floor cracks, saw-cut and control joints from cracking or spalling of the joint edges. Sinmast 501 can also be mixed with sand and applied as a coating for a resilient non-skid surface.

Polygem 1618 Epoxy Floor Coating is a ultra-clear epoxy coating formulated to provide a durable high-gloss protective surface. Polygem 1618 Epoxy Floor Coating is ideal for concrete and wood floor surfaces and is ideal for a clear-coat over flake and quartz floors. Polygem 1618 Epoxy Floor Coating is also excellent as a sealer coat over artificial rock and coral structure used in underwater exhibits and aquariums.

Polygem Sinmast 4 Regular is a high performance industrial epoxy formulated for industrial concrete patching and repair. Mix Polygem Sinmast 4 Regular with sand or aggregates to make epoxy grouts.