Products

Sinmast 501 is a 100% solids, flexibilized two-part epoxy joint filler specifically formulated to meet the punishing demands of today’s industrial floors. Sinmast 501 is used to fill and repair joints and cracks subjected to hard wheeled traffic and will provide for a flexible and durable surface. It is flexible, resilient and will help protect floor cracks, saw-cut and control joints from cracking or spalling of the joint edges. Sinmast 501 can also be mixed with sand and applied as a coating for a resilient non-skid surface.

Polygem 307 Ceramic Tile Adhesive is our industry standard epoxy tile adhesive. The 307 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The Polygem 307 Ceramic Tile Adhesive is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 307 Ceramic Tile Adhesive is moisture resistant and will even cure underwater.

Polygem 1004 Fast Set Wearing Compound is a very fast setting epoxy paste specially formulated for the sealing of cracked concrete prior to injection with epoxy or urethane resin systems. Polygem 1004 Fast Set Wearing Compound is an easy to mix 1 to 1 by volume ratio and will be ready for injection in as little as 35 minutes. is the preferred epoxy for use in occupied areas such as residential or institutional work areas. Polygem 1004 Fast Set Wearing Compound is a thick non-sag paste compound that will allow for vertical and overhead patching.

Polygem 580FS Fast Set Tile Adhesive is a specially formulated epoxy paste to provide a fast setting patching compound for immediate protection of surfaces subject to wear and abrasion. Polygem 580FS is an easy to mix 1 to 1 by volume ratio and will cure in as little as 15 minutes. Polygem 580FS is ideal for emergency repairs and will minimize down-time of critical equipment and process lines. Polygem 580FS is waterproof and resistant to most chemicals and solvents. Polygem 580FS is a thick non-sag paste compound that will allow for vertical and overhead patching.

Polygem 519 High Temperature Ceramic Tile Adhesive is our industry standard epoxy tile adhesive for use in environments up to 400°F. The Polygem 519 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The #519 is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 519 is moisture resistant and will even cure underwater.