Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Characteristics
The filler in the compound incorporates certain important properties those are essential for ultimate product.
The properties are as under:- Improves scratch resistance.
- Improves Dimension Stability etc.
- Improves Mechanical Property.
- Reduces Cost.
- Reduces Shrinkage
- Reduces Cycle time etc.
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Application
The compounds used directly or diluted with desired grades of polypropylenes show good dispersibility and excellent balance of properties in the ultimate product.
- Pre-drying
The Compound should be dried 70 ᵒC for 30 min in hopper to its use.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 1.05 - 1.10 | g/cc | PPIL Std. |
Moisture Content | max. 0.08 | % | PPIL Std. |
Filler Content | 20 ± 2 | % | TGA |
Form | Granules | - | Visual |
Flexural Modulus | 42,000 - 44000 | Kg/Cm2 | ASTM-D-790 |
Flexural Strength | 500 - 650 | Kg/Cm2 | ASTM-D-790 |
Izod Impact Strength/ Notched/ Unnotched | 6.50 - 7.00 | Kg.Cm/Cm | ASTM-D-256 |
Tensile Strength at Break | 350 - 400 | Kg/Cm2 | ASTM-D-638 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Extrusion Temperature Conditions
As a general guideline, the following temperature profile is recommended:
ZONES Zone-1
Zone-2
Zone-3
Zone-4
Zone-5
Zone-6
Temperature
190ᵒ
200ᵒ
210ᵒ
215ᵒ
220ᵒ
230ᵒ
Packaging & Availability
- Packaging Type
- Packing
HDPE/PP Woven Sack Bags of 25 kg. We believe this information is based on the best currently available data on this subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subjected to revision as additional knowledge and experience are gained. This publication is not a license to operate under or intended to suggest infringement of any existing patents.
Storage & Handling
- Storage
The material shall be kept in a cool dry place for best results.