Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
The fillers in the compound incorporates certain important properties those are essential for ultimate product. The modification are as below.
Reduces Improves Cost Mechanical properties Shrinkage Dimension stability Cycle time
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Pre-drying
The compound should be dried 70°C for 30 min in hopper to its use.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 1.45 | G/cc | PPIL Std. |
MFI | 5.00 - 8.00 6.00 - 9.00 9.00 - 12.00 | G/10Min. | ASTM-D- 1239 |
Moisture Content | min. 0.06 | % | PPIL Std. |
Tensile Strength at Break | 175 | Kg/Cm2 | ASTM-D- 638 |
Elongation at Break | 10 | % | ASTM-D- 638 |
Flexural Strength | 270 | Kg/Cm2 | ASTM-D- 790 |
Flexural Modulus | 40000 | Kg/Cm2 | ASTM-D- 790 |
Izod Impact Strength Notched | 2.5 10.00 | Kg/Cm2 | ASTM-D- 256 |
Filler Content | 61.5 | — | TGA |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Processing Parameters Temperature Zone wise
Zones Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Temperature 190°C 200°C 210°C 215°C 220°C 230°C
Packaging & Availability
- Packaging Type
- Packing
In 25 Kg HDPE/PP woven sacks. The information is to the best of our knowledge. The values of different parameters, operating conditions listed above are for guidance only and should not be used for drawing specification. The results & opera ting condition may vary depending on methods of test and manufacturing / testing equipment.
Storage & Handling
- Storage
The material shall be kept in a dry cool place.