Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Exceptional flexibility and adhesion High Solids Formula
- Formulated Indoor and outdoor use
- Seals High Pressure HVAC Duct Systems
- Has excellent mold and mildew resistance
- has smooth texture
- Freeze/Thaw stable
Applications & Uses
- Application Area
- Application Method
- Pressure Rating
Maximum 16" water column pressure.
- Coverage Rate
Approximately 100 sq. feet per gallon at 16 mils. wet film thickness
- Clean Up
Use soap and warm water.
- Recommended Uses
AIRSEAL 11 is a UL 181 A-M & B-M listed premium quality, high solids, high velocity duct sealant used to pressure seal all types of HVAC duct systems.
- Application Instructions
Apply to clean, dry surfaces, free from oils, dirt, and foreign matter. Spread at a minimum 16 mils. wet film thickness with a brush, or pump into well fitted joints. Seal all joints, seams, and penetrations in the ductwork to ensure an airtight system. Dries to touch in one (1) hour. Prior to pressure testing, allow 12 - 24 hours dry time depending on temperature, humidity, and application thickness. Do not apply on outdoor surfaces within 5 hours of possibility of rain or freezing temperatures.
- Application Instructions (UL 181 A-M & B-M)
Materials must be applied in strict accordance with the following instructions in order to meet the requirements of UL 181. Allow 48 hours dry time minimum for UL 181 applications.
UL 181 A-M Duct Board:
- Fold grooved duct board to form the module, making certain that both ends are flush and the shiplaps are properly sealed.
- Staple the duct board flap on 2” centers using outward clinching staples.
- Spread mastic base coat onto the surface at a minimum rate of 10 mils. wet film thickness, 3” wide over stapled joint.
- Embed fiberglass scrim tape (5 mils thick, 20 x 10 plain weave) into base coat.
- Finish with a top coat of mastic, applied at 10 mils. minimum wet film thickness.
UL 181 B-M Flexible Duct/Metal Duct:
- Coat around the collar fitting with mastic at 20 mils. wet film thickness, 3” wide.
- Pull back jacket and insulation from the inner core. Slide 2” of the inner core over the mastic and collar. Secure with a mechanical fastener.
- Pull the jacket and insulation back over core. Secure jacket in accordance with Flexible duct installation instructions.
Properties
- Technical Data
| Value | Units | Test Method / Conditions | |
| Solid Content | 73.0 | % | — |
| Weight (Per Gallon) | 11.1 - 11.7 | lbs | — |
| Flame Spread (Class 1 Smoke and Flame Rating) | 5.0 | — | UL 723, ASTM E-84, NFPA 90A, 90B and 225 |
| Smoke (Class 1 Smoke and Flame Rating) | 0.0 | — | UL 723, ASTM E-84, NFPA 90A, 90B and 225 |
Regulatory & Compliance
- Certifications & Compliance
- Regulatory and Compliance
- Leed EQ Credit 4.1
- Exceeds all SMACNA Pressure and Sealing Classes.
Packaging & Availability
- Packaging
- 10.5 oz. tubes
- 1 gal./case
- 2 gal. pail
- 5 gal. pail
- 55/53 gal. drum
Storage & Handling
- Shelf Life
18 months in unopened containers
- Temperature Limits
- Storage and Application: 35ºF - 110ºF
- Service: -40ºF - 200ºF
- Protect From Freezing. If frozen, completely thaw prior to use. (Passes 5 Freeze-Thaw Cycles).