Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
Injection Molding
- Additive
- Heat Stabilizer
- Lubricant
Features & Benefits
- Materials Features
- Features
- General Purpose
- Heat Stabilized
- Lubricated
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Impact Properties
Value | Units | Test Method / Conditions | |
Density | 1.13 | — | ASTM D792 |
Molding Shrinkage (at 0.125 in, Flow) | 0.011 - 0.015 | in/in | ASTM D955 |
Specific Gravity | 1.13 | — | ASTM D792 |
Value | Units | Test Method / Conditions | |
Tensile Strength (at Yield, 0.125 in) | 11000 | psi | ASTM D638 |
Tensile Strength (at Break, 0.125 in) | 11000 | psi | ASTM D638 |
Flexural Modulus (at 0.125 in) | 400000 | psi | ASTM D790 |
Flexural Strength (at 0.125 in) | 15400 | psi | ASTM D790 |
Value | Units | Test Method / Conditions | |
Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 350 | °F | ASTM D648 |
Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 150 | °F | ASTM D648 |
Relative Thermal Index Electrical Property (at 0.031 in) | 257 | °F | UL 746 |
Relative Thermal Index Electrical Property (at 0.06 in) | 257 | °F | UL 746 |
Relative Thermal Index Electrical Property (at 0.12 in) | 257 | °F | UL 746 |
Relative Thermal Index Electrical Property (at 0.24 in) | 257 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.06 in) | 167 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.12 in) | 167 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.24 in) | 167 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.06 in) | 185 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.12 in) | 185 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.24 in) | 185 | °F | UL 746 |
Value | Units | Test Method / Conditions | |
Volume Resistivity | 100000000000 | ohms·cm | ASTM D257 |
Dielectric Strength (at 0.0315 in) | 740 | V/mil | ASTM D149 |
Comparative Tracking Index (at 0.0315 in) | PLC 0 | — | UL 746 |
High Amp Arc Ignition (at 0.06 in) | PLC 0 | — | UL 746 |
High Amp Arc Ignition (at 0.12 in) | PLC 0 | — | UL 746 |
High Amp Arc Ignition (at 0.24 in) | PLC 0 | — | UL 746 |
High Voltage Arc Tracking Rate (at 0.0315 in) | PLC 0 | — | UL 746 |
Hot Wire Ignition (at 0.06 in) | PLC 3 | — | UL 746 |
Hot Wire Ignition (at 0.12 in) | PLC 2 | — | UL 746 |
Hot Wire Ignition (at 0.24 in) | PLC 2 | — | UL 746 |
Value | Units | Test Method / Conditions | |
Flame Rating (at 0.031 in) | V-2 | — | UL 94 |
Flame Rating (at 0.06 in) | V-2 | — | UL 94 |
Flame Rating (at 0.12 in) | V-2 | — | UL 94 |
Flame Rating (at 0.24 in) | V-2 | — | UL 94 |
Value | Units | Test Method / Conditions | |
Drying Temperature | 165 - 185 | °F | — |
Drying Time | 3.0 - 4.0 | hr | — |
Front Temperature | 470 - 500 | °F | — |
Middle Temperature | 460 - 490 | °F | — |
Mold Temperature | 150 - 180 | °F | — |
Rear Temperature | 430 - 475 | °F | — |
Maximum Drying Time | 8 | hr | — |
Processing Temperature (Melt) | 460 - 535 | °F | — |
Value | Units | Test Method / Conditions | |
Impact Strength (at 73°F, 0.125 in, Notched Izod) | 1 | ft·lb/in | ASTM D256 |
Gardner Impact Strength (at 0.125 in) | 320 | in·lb | ASTM D3029 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Agency Ratings & Compliance
RoHS Compliant
Packaging & Availability
- Regional Availability
- Availability
North America