Polymer Resources - PRL PPX-FR4 - PPO/PS Alloy

Identification & Functionality

Additives Included: Flame Retardant
Chemical Family: Styrenics
Polymer Name: PPO/PS Alloy
Composite Materials Functions: Resins, Binders & Matrix Materials
Plastics & Elastomers Functions: Resin
Technologies: Composite Materials,
Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Blends & Alloys
Composite Materials — Polymers & Resins
Thermoplastic Resins
Processing Method: Injection Molding
Additive: Flame Retardant

Features & Benefits

Labeling Claims: Bromine-free,
Chlorine-free
Materials Features: Flame Retardant,
Heat Resistance,
Self Extinguishing
Features: Bromine Free
Chlorine Free
Flame Retardant
Medium Heat Resistance
Self Extinguishing

Applications & Uses

Markets: Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma
Applications: Consumer Goods — Appliances & Electronics
Electrical & Electronics — Devices & Assemblies
Consumer Electronics
Healthcare & Pharma — Medical
Medical Devices & Assemblies
Plastics & Elastomers End Uses: Appliances,
Medical Devices
Composites Processing Methods: Injection Molding
Plastics & Elastomers Processing Methods: Injection Molding

Properties

	Value	Units	Test Method / Conditions
Density	1.1	—	ASTM D792
Melt Mass Flow Rate (at 250°C, 11.6 kg)	35 - 50	g/10 min	ASTM D1238
Molding Shrinkage (at 0.125 in, Flow)	5.0E-3 to 7.0E-3	in/in	ASTM D955
Molding Shrinkage (at 0.125 in, Across Flow)	5.0E-3 to 7.0E-3	in/in	ASTM D955
Specific Gravity	1.1	—	ASTM D792

	Value	Units	Test Method / Conditions
Tensile Strength (at Yield, 0.125 in)	7000	psi	ASTM D638
Tensile Strength (at Break, 0.125 in)	6800	psi	ASTM D638
Tensile Elongation (at Yield, 0.125 in)	6	%	ASTM D638
Tensile Elongation (at Break, 0.125 in)	20	%	ASTM D638
Flexural Modulus (at 0.125 in)	320000	psi	ASTM D790
Flexural Strength (at 0.125 in)	10500	psi	ASTM D790

	Value	Units	Test Method / Conditions
Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed)	185	°F	ASTM D648
Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed)	170	°F	ASTM D648

	Value	Units	Test Method / Conditions
Volume Resistivity	10000000000000000	ohms·cm	ASTM D257

	Value	Units	Test Method / Conditions
Drying Temperature	170 - 180	°F	—
Drying Time	3.0 - 4.0	hr	—
Front Temperature	460 - 530	°F	—
Middle Temperature	440 - 520	°F	—
Mold Temperature	150 - 180	°F	—
Rear Temperature	420 - 510	°F	—
Maximum Drying Time	8	hr	—
Processing Temperature (Melt)	475 - 525	°F	—

	Value	Units	Test Method / Conditions
Impact Strength (at -22°F, 0.125 in, Notched Izod)	1.5	ft·lb/in	ASTM D256
Impact Strength (at 73°F, 0.125 in, Notched Izod)	5	ft·lb/in	ASTM D256
Gardner Impact Strength (at 0.125 in)	125	in·lb	ASTM D3029

	Value	Units	Test Method / Conditions
Rockwell Hardness (R-Scale)	117	—	ASTM D785

Regulatory & Compliance

Packaging & Availability

Polymer Resources Ltd. PRL PPX-FR4