Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Reinforcement Material
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
Injection Molding
- Filler and Reinforcement
- Filler : Glass Fiber
- Reinforcement : 20% Filler by Weight
Features & Benefits
- Materials Features
- Features
- Hydrolytically Stable
- Low to No Water Absorption
- Medium Heat Resistance
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Composites Processing Methods
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Impact Properties
- Hardness
| Value | Units | Test Method / Conditions | |
| Density | 1.2 | — | ASTM D792 |
| Melt Mass Flow Rate (at 250°C, 11.6 kg) | 1.0 - 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage (at 0.125 in, Flow) | 2.0E-3 to 5.0E-3 | in/in | ASTM D955 |
| Specific Gravity | 1.2 | — | ASTM D792 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength (at Yield, 0.125 in) | 13500 | psi | ASTM D638 |
| Tensile Strength (at Break, 0.125 in) | 13500 | psi | ASTM D638 |
| Tensile Elongation (at Break, 0.125 in) | 3 | % | ASTM D638 |
| Flexural Modulus (at 0.125 in) | 750000 | psi | ASTM D790 |
| Flexural Strength (at 0.125 in) | 20000 | psi | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 280 | °F | ASTM D648 |
| Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 270 | °F | ASTM D648 |
| Vicat Softening Temperature | 290 | °F | ASTM D1525 ² |
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 10000000000000000 | ohms·cm | ASTM D257 |
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 220 - 230 | °F | — |
| Drying Time | 3.0 - 4.0 | hr | — |
| Front Temperature | 540 - 600 | °F | — |
| Middle Temperature | 520 - 590 | °F | — |
| Mold Temperature | 160 - 220 | °F | — |
| Rear Temperature | 500 - 580 | °F | — |
| Maximum Drying Time | 8 | hr | — |
| Processing Temperature (Melt) | 550 - 600 | °F | — |
| Value | Units | Test Method / Conditions | |
| Impact Strength (at 73°F, Notched Charpy) | 3 | ft·lb/in² | ISO 179/1 |
| Impact Strength (at -22°F, 0.125 in, Notched Izod) | 1 | ft·lb/in | ASTM D256 |
| Impact Strength (at 73°F, 0.125 in, Notched Izod) | 1.5 | ft·lb/in | ASTM D256 |
| Impact Strength (at 73°F, Notched Izod) | 3 | ft·lb/in² | ISO 180/1A |
| Value | Units | Test Method / Conditions | |
| Rockwell Hardness (L-Scale) | 106 | — | ASTM D785 |
Regulatory & Compliance
- Certifications & Compliance
- Agency Ratings & Compliance
RoHS Compliant
Packaging & Availability
- Regional Availability
- Availability
North America