Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Processing Method
Injection Molding
- Additive
Flame Retardant
Features & Benefits
- Materials Features
- Features
- Flame Retardant
- Self Extinguishing
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Impact Properties
Value | Units | Test Method / Conditions | |
Density | 1.39 | — | ASTM D792 |
Melt Mass Flow Rate (at 250°C, 2.16 kg) | 10 - 18 | g/10 min | ASTM D1238 |
Molding Shrinkage (at 0.125 in, Flow) | 0.015 - 0.020 | in/in | ASTM D955 |
Specific Gravity | 1.39 | — | ASTM D792 |
Value | Units | Test Method / Conditions | |
Tensile Strength (at Yield, 0.125 in) | 8400 | psi | ASTM D638 |
Tensile Strength (at Break, 0.125 in) | 8400 | psi | ASTM D638 |
Flexural Modulus (at 0.125 in) | 375000 | psi | ASTM D790 |
Flexural Strength (at 0.125 in) | 14000 | psi | ASTM D790 |
Value | Units | Test Method / Conditions | |
Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 300 | °F | ASTM D648 |
Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 155 | °F | ASTM D648 |
Relative Thermal Index Electrical Property (at 0.031 in) | 266 | °F | UL 746 |
Relative Thermal Index Electrical Property (at 0.06 in) | 266 | °F | UL 746 |
Relative Thermal Index Electrical Property (at 0.12 in) | 266 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.031 in) | 248 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.06 in) | 248 | °F | UL 746 |
Relative Thermal Index Impact Property (at 0.12 in) | 248 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.031 in) | 266 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.06 in) | 266 | °F | UL 746 |
Relative Thermal Index Strength Property (at 0.12 in) | 266 | °F | UL 746 |
Value | Units | Test Method / Conditions | |
Volume Resistivity | 10000000000000000 | ohms·cm | ASTM D257 |
Dielectric Strength (at 0.0315 in) | 990 | V/mil | ASTM D149 |
Arc Resistance (at 0.0315 in) | PLC 6 | — | ASTM D495 |
Comparative Tracking Index (at 0.0315 in) | PLC 2 | — | UL 746 |
High Amp Arc Ignition (at 0.03 in) | PLC 0 | — | UL 746 |
High Amp Arc Ignition (at 0.06 in) | PLC 0 | — | UL 746 |
High Amp Arc Ignition (at 0.12 in) | PLC 0 | — | UL 746 |
High Voltage Arc Tracking Rate (at 0.0315 in) | PLC 3 | — | UL 746 |
Hot Wire Ignition (at 0.03 in) | PLC 4 | — | UL 746 |
Hot Wire Ignition (at 0.06 in) | PLC 3 | — | UL 746 |
Hot Wire Ignition (at 0.12 in) | PLC 2 | — | UL 746 |
Value | Units | Test Method / Conditions | |
Flame Rating (at 0.031 in, All) | V-0 | — | UL 94 |
Flame Rating (at 0.06 in, All) | V-0 | — | UL 94 |
Flame Rating (at 0.12 in, All) | V-0, 5VA | — | UL 94 |
Value | Units | Test Method / Conditions | |
Drying Temperature | 240 - 250 | °F | — |
Drying Time | 3.0 - 4.0 | hr | — |
Front Temperature | 470 - 500 | °F | — |
Middle Temperature | 460 - 490 | °F | — |
Mold Temperature | 110 - 140 | °F | — |
Rear Temperature | 450 - 480 | °F | — |
Maximum Drying Time | 8 | hr | — |
Processing Temperature (Melt) | 450 - 500 | °F | — |
Value | Units | Test Method / Conditions | |
Impact Strength (at 73°F, 0.125 in, Notched Izod) | 1 | ft·lb/in | ASTM D256 |
Gardner Impact Strength (at 0.125 in) | 320 | in·lb | ASTM D3029 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Agency Ratings & Compliance
RoHS Compliant
Packaging & Availability
- Regional Availability
- Availability
North America