Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Processing Method
Injection Molding
- Additive
Flame Retardant
- Filler and Reinforcement
- Filler : Glass/Mineral
- Reinforcement : 40% Filler by Weight
Features & Benefits
- Materials Features
- Features
- Flame Retardant
- High Heat Resistance
- Self Extinguishing
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Impact Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.75 | — | ASTM D792 |
| Melt Mass Flow Rate (at 250°C, 2.16 kg) | 2.0 - 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage (at 0.125 in, Flow) | 4.0E-3 to 8.0E-3 | in/in | ASTM D955 |
| Specific Gravity | 1.75 | — | ASTM D792 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength (at Yield, 0.125 in) | 14000 | psi | ASTM D638 |
| Tensile Strength (at Break, 0.125 in) | 14000 | psi | ASTM D638 |
| Flexural Modulus (at 0.125 in) | 1450000 | psi | ASTM D790 |
| Flexural Strength (at 0.125 in) | 23000 | psi | ASTM D790 |
| Value | Units | Test Method / Conditions | |
| Deflection Temperature Under Load (at 66 psi, 0.125 in, Unannealed) | 400 | °F | ASTM D648 |
| Deflection Temperature Under Load (at 264 psi, 0.125 in, Unannealed) | 370 | °F | ASTM D648 |
| Relative Thermal Index Electrical Property (at 0.06 in) | 266 | °F | UL 746 |
| Relative Thermal Index Impact Property (at 0.06 in) | 266 | °F | UL 746 |
| Relative Thermal Index Strength Property (at 0.06 in) | 266 | °F | UL 746 |
| Value | Units | Test Method / Conditions | |
| High Amp Arc Ignition (at 0.06 in) | PLC 0 | — | UL 746 |
| Hot Wire Ignition (at 0.06 in) | PLC 0 | — | UL 746 |
| Value | Units | Test Method / Conditions | |
| Flame Rating (at 0.06 in) | V-0 | — | UL 94 |
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 240 - 250 | °F | — |
| Drying Time | 3.0 - 4.0 | hr | — |
| Front Temperature | 490 - 510 | °F | — |
| Middle Temperature | 480 - 500 | °F | — |
| Mold Temperature | 160 - 200 | °F | — |
| Maximum Drying Time | 8 | hr | — |
| Rear Temperature | 470 - 490 | °F | — |
| Processing Temperature (Melt) | 480 - 530 | °F | — |
| Value | Units | Test Method / Conditions | |
| Impact Strength (at 73°F, 0.125 in, Notched Izod) | 1 | ft·lb/in | ASTM D256 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Agency Ratings & Compliance
RoHS Compliant
Packaging & Availability
- Regional Availability
- Availability
North America