Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
- Additives
- 1004 Thinner - Use up to 7% as needed
- 13973 Cling Modifier at 3% as needed
- 1534 Adhesion Promoter up to 3% as needed
- 11939 Adhesion Promoter, 3% as needed
- 2980 Catalyst, 3% as needed (will gel in 4 hours)
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Performance Properties
- Adhesion to wide variety of substrates
- Flexible for multi-layer applications/die-cutting
- Non-blocking, high-slip finish for easy handling
- N-VP and heavy metal free
- Superb water and abrasion resistance
- Superior opacity for color trapping
- Properties
Light Fastness
At full strength and cured properly, GP colors are formulated to withstand up to three years of exterior exposure with clear. ( will chalk after 1 year without clear). Factors that will alter the outdoor durability of the ink include but are not limited to: substrate grade/age, poor cure of the ink film, formulas, directional positioning, ink film deposit, exposure to excessive abrasives and air pollutant care should be taken when reducing the mass tone* colors with clear or tinting white as this could negatively affect the exterior durability of the color. Colors that should not be used for outdoor applications are: available by calling our Technical Services Department. *Mass tone: the full product color without dilution.ROLLER COATING
21748 SP RC Universal Gloss Overprint ClearSCREEN
14152 SP GP Solarshield Overprint ClearPrinting
Mix well prior to use. While supplied in press ready condition, GP may be reduced up to 7% with #1004 Thinner. Care should be taken to print the ink at optimal temperature 70 - 90° F (21 - 27° C). Cool ink will heavier viscosity and will not flow properly. Hot ink will be lower in viscosity resulting in poor definition and decreased opacity.Coverage
3,200 to 3,600 square feet per gallon based on ink deposit .40 - .60 mil dependent on color and printing conditions.
Applications & Uses
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Recommended Substrates
- ABS
- Coated paper
- Expanded Foam PVC (Sintra®, Celtec®)
- Foam Board
- Fluted Polyolefin’s*
- PETG
- Polycarbonate (Adhesive not Recommended)
- Polyethylene Coated Card Stock
- Polyethylene Sheet*
- Polystyrene
- Pressure Sensitive Vinyl
- Rigid Vinyl
- Vinyl Banner (1 & 2 sided)
*With the use of Adhesion Promoter (3% of 1534 or 3% of 11939), Renegade will adhere to fluted polyolefin’s such as Coroplast® and polyethylene sheet. Best adhesion forms after a six (6) hour post cure. Either adhesion promoter provides excellent water resistance.
- Curing/Processing Guidelines
Ink will cure well when printed through 355 (140cm) plain weave polyester mesh or finer. GP’s optimal cure window of 125 - 150 mJ/ cm² 550 - 650 mW/ cm² is generally achieved with one 200 watt per inch mercury vapor lamp at a belt speed of 70 - 90 feet per minute (21 - 27m / min). This should provide thorough cure of the product. Cure speeds may vary as thicker material and dark surface colors require more energy. Adhesion should be a minimum of 95% from curing unit with final adhesion developing within six hours of initial polymerization. Coarser fabrics can be utilized, however, cure parameters may need to be adjusted for increased ink film. If a loss of gloss or adhesion due to insufficient cure in noticed, the use of 5 – 10% GP Mixing/Overprint Clear will increase light penetration and improve cure.
- Metallic's
Use the Metallic Mixing Clear to prepare metallic ink as its increase viscosity helps insure a good particle suspension and extended shelf life.
- Recommended
Recommended mixing ratios, by weight are:
- 28% gold paste
- 12% silver paste
For optimum coverage and opacity, 280-305 (110 – 120cm) plain weave mesh. Use Solar Shield Clear for extended weatherability and to improve the non-tarnishing properties of the product.
- Recommendation
We strongly recommend a preliminary test of printing and curing on the supports intended to use, in order to ascertain exactly the procedure, the working times and the obtained effect. MIX WELL BEFORE USE. Follow the directions on the package, ask for the safety data sheets and always follow the directions contained therein.
Properties
- Color
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautions
Read the material safety data sheet prior to processing. It contains instructions for precautions to be taken when handling inks. If ink comes in contact with skin wipe off with a clean, dry cloth (do not use solvent). Wash and rinse the affected areas with soap and water.
Storage & Handling
- Storage
Care should be taken to store ink in tightly closed containers located in a cool (60-80°F/15-27°C) dark place. With suitable conditions, unopened CYMK in is expected to have a shelf life of approximately twelve (12) months from date of manufacturer, White approximately six (6) months from date of manufacture.