Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Benefits
- Simple preparation.
- Spreads and applies easily.
- Can be shaped to required profile.
- Repositioning possible for up to 30 minutes.
- Does not shrink.
- Excellent chemical resistance.
- Good adhesion to a variety of metals, ceramics and hard plastics.
Applications & Uses
- Applications
- Basic Uses
MIX2FIX Bronze spreads easily and fills large and small gaps on both horizontal and vertical surfaces. When fully cured, conventional metalworking techniques can be used to machine, file, drill, sand, and paint the finished repair. Use MIX2FIX Bronze to fill holes and cracks; repair worn, broken or damaged parts or components, such as marine bronze castings, valve bodies, fabrications, tanks, metal fittings and wood. It can also be used to level machinery; make small-scale templates, parts, models and molds; and as a general-purpose repair product for bronze parts, profiles, castings and plates.
- Applications Limitations
- Does not adhere to polyethylene, polypropylene or PTFE.
- See performance data for temperature limits.
- Do not apply at temperatures below 41°F (5°C).
- Not intended for structural applications.
- How to use
Surface Preparation
To achieve optimum adhesion, remove grease and dirt from surfaces using a solvent wipe. Lightly abrading or grit blasting the surface prior to cleaning will improve adhesion.
Mixing and Application
Small quantities of product can be mixed by hand using a spatula or palette knife; larger quantities can be machinemixed. Wear impermeable gloves when mixing or handling uncured product. Measure out equal volumes or weights of the two components, using different utensils for each to avoid contamination. Use only the amount needed for the job at hand. Mix thoroughly for a minimum of 3 minutes until uniform in color. Using a spatula or palette knife apply to the clean, dry surface and remove excess material before the paste has set. Mixed product should be used within 25 to 30 minutes to ensure maximum adhesion. Applying product after this time may impair bond strength. Working time is 60 minutes at 68°F (20°C) but it is recommended that repairs be completed within 30 minutes to avoid disturbing the repair as it begins to set. To achieve a glossy finish, smooth the surface immediately after application with a knife moistened with a solvent such as acetone or mineral spirits. MIX2FIX Bronze will start setting within an hour at 68°F (20°C), depending on volume and temperature: the greater the volume (or higher the temperature), the faster it will set. Allow 4 to 6 hours before handling and 48 hours before returning to service. It can be shaped, filed and polished after 48 hours.
Properties
- Cured Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Chemical Resistance | Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions, dilute acids and bases | — | — |
| Compressive Strength | 10,000 (69) | psi (MPa) | — |
| Hardness, (48 Hours) | 75.0 | Shore D | — |
| Lap Shear Tensile Strength On Steel | 2,175 (15) | psi (MPa) | — |
| On Aluminum | 1,300 (9) | psi (MPa) | — |
| Physical Appearance | Metallic bronze solid | ASTM D2240 | — |
| Temperure Limits Continuous | -4 to +248 (-20 to +120) | °F(°C) | — |
| Temperure Limits Intermittent | -4 to +302 (-20 to +150) | °F(°C) | — |
| Tensile Strength | 2,500 (17.5) | psi (MPa) | — |
| Value | Units | Test Method / Conditions | |
| Applicion Temperure | 50 to 95 (10 to 35) | °F(°C) | — |
| Composition | Filled epoxy resin | — | — |
| Handling Time 68°F (20°C) | 6.0 | hours | — |
| Maximum Thickness In One Pass (<12 Mm) | max. 0.47 | — | — |
| Mixed Density | 15 (1.8) | lb/gl( g/cm3)) | — |
| Mixing Rio By Weight Or Volume | 0.04236111111111111 | — | — |
| Odor (Hardener) | Faint amine smell (no odor when cured) | — | — |
| Physical Appearance | Paste | — | — |
| Return To Service Time (73°F (23°C)) | 48.0 | hours | — |
| Viscosity | 7,50,000 | cps | — |
| Work Life (68°F (20°C)) | 1.0 | hour | — |
Safety & Health
- Health Precautions
Contains Epoxy Resin. Epoxies are skin/eye irritants and known sensitizers. Direct product contact may cause an allergic reaction in some individuals. Avoid skin/eye contact. Wear impermeable gloves when mixing or handling uncured product. Inhalation of dust may be harmful. Avoid inhalation of dust. Wear dust mask and protective eyewear when sanding cured product. Ingestion of product may be harmful. Avoid ingestion. KEEP OUT OF THE REACH OF CHILDREN.
Packaging & Availability
- Packaging
Available for private label. Packaging options to be determined. Minimum batch quantities apply.
Storage & Handling
- Shelf Life
Two years from date of shipment when stored in dry storage area in unopened containers at 68°F (20°C).