Polynt Group BMC GP 400/25

Polynt Group BMC GP 400/25 is a bulk molding compound based on an unsaturated polyester resin, reinforced with glass fibers. This BMC has been developed for general purpose. Excellent mechanical properties and good flow are combined into the BMC GP 400/25. BMC GP 400/25 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Functions: Molding Compound

Reinforcement Material: Glass Fibers

End Uses: Pipes, Tanks

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Reinforcement Material: Glass Fibers
Composite Materials Functions: Molding Compound
Technologies: Composite Materials
Product Families: Composite Materials — Prepregs & Molding Compounds
Bulk Molding Compounds (BMC)

Applications & Uses

Markets: Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts
Industrial — Oil, Gas & Mining
Refining & Gas Processing
Industrial — Power, Water & Utilities
Power & Utilities,
Renewable Energy
Composites End Use: Pipes,
Tanks

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Rockwell Hardness	80	Scale M	ISO 2039-2
Flexural strength	100	MPa	ISO 14125A
Impact strength (Charpy)	35	KJ/m2	ISO 179
Heat distortion temperature HDT	min. 200	°C	ISO 75
Flexural modulus	11	MPa	ISO 14125A
Tracking resistance CTI	600	V	IEC 112
Quantity of glass	20	%	—
Linear Shrinkage	0,15	%	ISO 2577
Water absorption	0,2	%	ISO 62 Met. 1
Density	1,8	g/cm3	ISO 1183
Surface resistivity	10^14	—	—
Volume resistivity	10^14	—	—

Regulatory & Compliance

Certifications & Compliance: REACH (Europe)

Storage & Handling

Handling and Storage: Storage in a dry place at 15-25°C, out of direct sunlight

Molding time 30 s/mm

Molding pressure 60 - 110 bar

Molding temperature 140 - 160°C

Polynt Group BMC GP 400/25

Similar Products

EcoPaXX® Q-KXG6

ForTii® Ace JTX8

ForTii® Ace MX51

ForTii® Ace MX52

ForTii® Ace MX53

ForTii® Ace MX53B

Knowde Enhanced TDS