Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
Properties
- Typical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 60093 |
Shrinkage | - 0,06 | % | ISO 2577 |
dielectric loss factor | 0,02 | tan s | IEC 60250 |
dielectric constant | 1,5 | — | IEC 60250 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
tracking resistance | CTI 600 | level | IEC 60112 |
fibre length | 25/50 | mm | PA 3.01 |
Flexural strength | 160 | N/mm2 | ISO 14125 |
impact strength | 90 | KJ/m2 | ISO 179 |
fibre Content | 28 | % | ISO 1172 |
Water absorption | max. 50 | mg | ISO 62 |
Tensile strength | 75 | N/mm2 | ISO 527-4 |
surface weight | 3.6 | g/m2 | ISO 10352 |
Curing Time | 85 | sec | ISO 12114/1 |
Flexural modulus | 11 | N/mm2 | ISO 14125 |
dielectric strength | 20 | KV/mm | IEC 60243-1 |
Specific volume resistance | 1014 | Ohm x cm | IEC 60093 |
Specific Density | 1,90 | g/cm3 | ISO 1183 A |
Value | Units | Test Method / Conditions | |
Flammability | V 0 (4,0) | — | — |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 100 bar
- Molding temperature 140 - 155 °C