Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | max. 10^9 | Ohm | IEC 93 |
fibre length | 25 | mm | PA 3.01 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
surface weight | 4 | g/m2 | ISO 10352 |
fibre Content | 28 | % | ISO 1172 |
Flexural modulus | 10 | N/mm2 | ISO 14125 |
Curing Time | 60 | sec | ISO 12114/1 |
Water absorption | 50 | mg | ISO 62 |
Flexural strength | 150 | N/mm2 | ISO 14125 |
impact strength | 60 | KJ/m2 | ISO 179 |
Specific Density | 178 | g/cm3 | ISO 1183 A |
Shrinkage | 14 | % | ISO 2577 |
long-term temperature resistanceafter 20.000h | Ti = 145 | °C | IEC 216 |
tracking resistance | CTI 300 | level | IEC 112 |
reduction of impact strength | max. 5 | % | ISO 179 |
Flame resistance | V 0 / 3,0 | mm | UL 94 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 100 bar
- Molding temperature 140 - 150 °C