Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 93 |
Shrinkage | 0,19 | % | ISO 2577 |
surface weight | 4.5 | g/m2 | ISO 10352 |
fibre length | 25 | mm | PA 3.01 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
tracking resistance | CTI 600 | level | IEC 112 |
Specific volume resistance | 1014 | Ohm x cm | IEC 93 |
Specific Density | 1,78 | g/cm3 | ISO 1183 A |
fibre Content | 15 | % | ISO 1172 |
Curing Time | 53 | sec | ISO 12114/1 |
Flexural modulus | 9.8 | N/mm2 | ISO 14125 |
Flexural strength | 132 | N/mm2 | ISO 14125 |
impact strength | 49 | N/mm2 | ISO 179 |
limited oxygen index | 52 | % | ISO 4589 |
Water absorption | max. 0,12 | % | ISO 62 |
flammability | V 0/1,9 (I1/F1) | mm (Class 4) | UL-94 (NF 16-101) |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 125 - 155 °C