Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 93 |
surface weight | 4.5 | g/m2 | ISO 10352 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
fibre length | 25/50 | mm | PA 3.01 |
tracking resistance | CTI 600 | level | IEC 112 |
Specific volume resistance | 1014 | Ohm x cm | IEC 93 |
impact strength | 40 | KJ/m2 | ISO 179 |
Water absorption | 50 | mg | ISO 62 |
fibre mass Content | 20 | % | ISO 1172 |
Specific Density | 160 | g/cm3 | ISO 1183 A |
Shrinkage | 16 | % | ISO 2577 |
Flexural modulus | 7.5 | N/mm2 | ISO 14125 |
Flexural strength | 135 | N/mm2 | ISO 14125 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 135 - 155 °C