Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 60093 |
Shrinkage | 0,03 | % | ISO 2577 |
fibre length | 25/50 | mm | PA 3.01 |
surface weight | 3 | g/m2 | ISO 10352 |
fibre Content | 50 | % | ISO 1172 |
Specific Density | 1,73 | g/cm3 | ISO 1183 A |
Specific volume resistance | 1014 | Ohm x cm | IEC 60093 |
Flexural modulus | 13 | N/mm2 | ISO 14125 |
Flexural strength | 240 | N/mm2 | ISO 14125 |
Tensile strength | 120 | N/mm2 | ISO 527-4 |
impact strength | 100 | °C | ISO 179 |
heat distortion temperature | min. 200 | level | ISO 75-2° |
tracking resistance | CTI 600 | % | IEC 60112 |
dielectric strength | 24 | level | IEC 60243-2-1 |
Water absorption | max. 0,12 | % | ISO 62 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 135 - 155 °C