Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 60093 |
dielectric loss factor at 1000 Hz | 0,01 | tan s | IEC 60250 |
Shrinkage | 0,05 | % | ISO 2577 |
fibre length | 25 | mm | PA 3.01 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
tracking resistance | CTI 600 | level | IEC 60112 |
Flexural modulus | 12 | N/mm2 | ISO 14125 |
fibre Content | 35 | % | ISO 1172 |
Water absorption | max. 50 | mg | ISO 62 |
surface weight | 3.6 | g/m2 | ISO 10352 |
dielectric strength | 20 | KV/mm | IEC 60243-1 |
Specific volume resistance | 1014 | Ohm x cm | IEC 60093 |
Curing Time | 60 | sec | ISO 12114/1 |
Specific Density | 1,82 | g/cm3 | ISO 1183 A |
Flexural strength | 220 | N/mm2 | ISO 14125 |
Tensile strength | 110 | N/mm2 | ISO 527-4 |
Tensile Modulus | 11.5 | N/mm2 | ISO 527-4 |
impact strength | 95 | KJ/m2 | ISO 179 |
dielectric constant at 1000 Hz | 4,0 | — | IEC 60250 |
Flame resistance | V 0 / 3,6 | mm | UL 94 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 130 - 150°C