Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
- Markets
Properties
- Typical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 93 |
Shrinkage | 0,03 | % | ISO 2577 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
Flexural strength | 160 | N/mm2 | ISO 14125 |
fibre length | 25 | mm | DF PA3.01 |
Flexural modulus | 12 | N/mm2 | ISO 14125 |
impact strength | 80 | KJ/m2 | ISO 179 |
Specific volume resistance | 1014 | Ohm x cm | IEC 93 |
surface weight | 3.6 | g/m2 | ISO 10352 |
Specific Density | 1,88 | g/cm3 | ISO 1183 A |
fibre Content | 27 | % | ISO 1172 |
Tensile strength | 70 | N/mm2 | ISO 527-4 |
limited oxygen index | 44 | % | ISO 4589 |
hazard level (acc. requirement R1, unpainted) | HL 2 | category | CEN/TS 45545-2-2009 |
tracking resistance | CTI 600 | Level | IEC 112 |
Water absorption | max. 0,30 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Flammability | V 0 (2,5) | — | — |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 30 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 140 - 155°C