Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Applications
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 1, 7 | g/cm3 | ISO 1183 |
Glow wire GWFI | 960 | °C | IEC 695-2-1 |
Heat distortion temperature HDT | min. 200 | °C | ISO 75 |
Tracking resistance CTI | 600 | V | IEC 112 |
Linear Shrinkage | 0, 1 | % | ISO 2577 |
arc resistance | min. 180 | s | ASTM D 495 |
Impact strength (Charpy) | 60 | KJ/m2 | ISO 179 |
Dielectric rigidity | 18 | KV/mm | IEC 243 |
Quantity of glass | 25 | % | ISO 11667 |
Flexural strength | 150 | Mpa | ISO 14125A |
Flexural modulus | 9.5 | Mpa | ISO 14125A |
Rockwell hardness | 80 | Hrm | ISO 2039-2 |
Surface resistivity | 10^14 | Ω | IEC 93 |
Volume resistivity | 10^14 | Ω mm | IEC 93 |
Water absorption | max. 0,2 | % | ISO 62 Met. 1 |
Storage & Handling
- Handling and Storage
- Storage in a dry place at 15-25°C, out of direct sunlight
- Molding time 40 s/mm
- Molding pressure 70 - 110 bar
- Molding temperature 140 – 160°C