Products

Polynt Group 55, 55X is designed for interior application; meets particular flame-retardant requirements; not recommended for parts used under direct sun exposure or prolonged water immersion. It is generally used in composites applicatons.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

ARMORSTAR 30/45 (E) - Thixotropic,preaccelerated,with LSE system

Polynt Group 22, 22-01 - superior waterimpact resistance and weathering properties; resistance to staining, chalking, crazing and cracking; high gloss retention; easy sprayability. It is generally used in composites applicatons.

Polynt Group 222X is clear and transparent for granite applications. It is generally used in composites applicatons.

Polynt Group 32X series are barriers type coatings developed for the composites and fiberglass industry. The 32X series have been formulated to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. This barrier coat was primarily developed for parts that are in conditions with prolonged contact with water and reduce the risk of water blistering. The 32X barrier coat are formulated to result with a fast cure, sagging resistant and ready-tospray after the addition of the proper amount of appropriate methyl ethyl ketone peroxide catalyst. Normally, dark Colors help to detect and eliminate air bubbles. However, it also can affect the quality of the final product. Contact you representative to have more details on Colors available. Because these 32X series barrier coat are formulated with special additives they have a fair resistance to UV and are not recommended for direct sunlight exposure. It would result in rapid chalking and fading.

Polydyne® 5062P - preaccelerated, high transparency, flexible, low shrinkage. Main applications areas are composites, eyewear and jewelers, textile industry etc.

Polycor® Mesmeric is the most recognizable fiberglass swimming-pool finishes range in australia: it is unbeatable in terms of performance, practicality and value for money, as well as esthetically beautiful. Formulated on Polycor® 943 gel coats, Polycor® mesmeric pool finishes offer exceptional water and chemical resistance, as well as long lasting UV stability. Available in three distinct styles, there is a color and texture combination that will co-ordinate with any architectural or exterior setting. Mesmeric stargaze has a brilliant deep sparkling lustrous finish that looks fabulous from a distance. The tiny sparkles change color as the direction of light changes. A fantastic effect as wave action changes the sparkle in sunlight or by pool light at night. Mesmeric granitea has a slightly more restrained finish, still with a beautiful lustrous gloss, but with a fascinating stone texture enhancement, giving a subtle natural look. Mesmeric silken has a deep, lustrous gloss finish but without any texture effects – designed to blend into more traditional architectural surroundings. It is generally used in composites applicatons.

Polynt Group BMC S 1800 Structural is a bulk molding compound based on a blend of different thermoset resins reinforced with glass fibers. This BMC has been developed for structural application. Excellent mechanical properties, mainly impact resistance, and easy molding behavior are combined into the BMC S 1800. BMC S 1800 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group 57VX have been formulated as barrier coats to reduce osmotic blistering, and as a print blockers, to provide a smoother gelcoat finish. A number benefits have been demonstrated, capitalizing on some of these product’ unique properties.Black color that provides a visual aid to see air bubbles during laminationWhite available for use behind loW-hide colorsless osmoticwater blisteringimproved cosmetics due to reduced fiber print-through & distortionreduced back side tack do not use vinylester barrier coats 57v as a finish coat, as exterior durability is poor, and will result in rapid chalking and fading.

Polynt Group 22-010LV clear series gelcoat is formulated from high quality iso-npg polyester resin, and is suitable for use in the manufacture of sanitary applications and cultured marble. This gelcoat provide quality finishes which deliver good water resistance, gloss retention and resiliency. The 22-010lv series gelcoat are sag resistant and have a fast curing system.Formulated for spray and roll applicationfast gel time and cure time that provide a good cure.Require only the addition of a proper amount of mekp to cure.Permit to fabricator to meet requirements of the canadian standard association b45, 5-02 parts that have to be assembled should be sanded before, to obtain a good adhesion. The 22-010lv series gelcoat may be applied by brush, roller or spray.

Polydyne® 5056 is used for general purpose and gel coat formulation. Main applications areas are composites, eyewear and jewelers, textile industry etc.

Polynt Group 255X series gelcoats are formulated specifically for the fiberglass industry where reduced flame propagation properties are needed. Its specific formulation results in a unique hardness that helps to prevent graffiti and scratches. 255X series gelcoats are designed for interior application. Because of the special additives that improve hardness and decrease the flame spread, 255X series are not recommended for parts used under direct sun exposure or prolonged water immersion.

Polynt Group 23V, 23VX - tooling gel coat; suitable for molds; cures to a very hard and resilient surface with a high gloss; high heat distortion temperature. It is generally used in composites applicatons.

Polydyne® 5005 is used for general purpose and gel coat formulation. Main applications areas are composites, textile industry etc.

Polycor® 945 Tooling polyester tooling gel coats provide durable surfaces to withstand the repeated moldings of FRP laminates. It is generally used in composites applicatons.

Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

Polydyne® 7030 - low viscosity, high reactivity for RTM light by vacuum process. It is generally used in composites applicatons.