Products

Aquamac® 700 is a high gloss styrene acrylic latex resin optimized to obtain water and corrosion resistance at low film builds. It offers excellent inherent corrosion resistance without the use of additives, which can be further enhanced with the addition of anticorrosive pigments. This latex resin is a formulator friendly, nontoxic waterborne alternative for maintenance, railcar and oem finishes. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® HS 57-5776 is a high solids polyester resin that is HAPs-free. Properties include a good combination of hardness and flexibility with chip and mar resistance. Manufactured in North America. All components of this product are listed on the DSL.

Macopol® 53-5359 is an acrylic-modified alkyd copolymer designed for excellent exterior durability with fast dry and good adhesion to metal surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

Macopol® 214-1092 can be formulated into stain-blocking primers.

Acrylamac® HS 232-2315 is a t-butyl acetate version of 232-2314 is mainly used in industrial maintenance topcoat applications.

Acrylamac® HS 232-2314 is a hydroxyl-functional resin with low isocyanate demand designed for use in high-performance industrial maintenance topcoat applications, can also be formulated to 340 g/l VOC.

Macopol® HS 214-1158 is a styrene acrylic-modified alkyd resin with excellent exterior durability. The copolymer is supplied in a HAPs-free solvent and can be formulated to produce coatings applied at 420 g/l VOC. Manufactured in North America.

Macopol® 214-1025 is a fast-drying styrenated alkyd with good durability, gloss and gloss retention. Manufactured in North America.

Polymac® 5160 is a high gloss, general purpose carboxyl-functional polyester resin designed for cure with TGIC at a 93:7 ratio and with primid xl-552 at a 95:5 ratio. The resulting coatings exhibit excellent flow, good flexibility and superior exterior durability. Polymac® 5160 is TMA-free.

Acrylamac® 17-1100 is an acrylic polyol that provides outstanding performance in applications where ambient cure is required. This resin provides a long-lasting coating with good corrosion resistance, appearance, gloss and color retention when reacted with aliphatic isocyanates. It is ideally suited for use on large structures or objects where superior durability is a requirement. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 2090 is a medium to low reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins EEW = 700-850 in 60:40 ratio, this resin offers excellent flow, good corrosion resistance, good overall chemical resistance, and very good mechanical properties for interior decorative or primer coatings.

Polymac® 2360 is a very high reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins E.E.W. = 700-950 in 50:50 ratio, this resin offers good flow, good chemical resistance and mechanical properties for interior decorative or primer coatings.

Polymac® 2510 is a very versatile, high reactivity, carboxyl-functional polyester resin for powder coatings. It can be cured with epoxy resins with eew's from 500-1000 to yield hybrid formulations with polyester/epoxy ratios from 45:55 to 60:40. These interior decorative or primer coatings cure rapidly and have excellent mechanical and corrosion resistance properties.

Polymac® HS 220-2015 is a high solids aliphatic polyester featuring high gloss and excellent clarity and color. It is designed to provide 2.8 VOC compliant coatings that exhibit superior weatherability, excellent durability and a balance of film properties, including skydrol resistance. Polymac® HS 220-2015 is an excellent blending resin for acrylics and similar resins to enhance film performance and VOC in either isocyanate or melamine cured coatings. Manufactured in North America.

Acrylamac® HS 232-2350 - a hydroxyl-functional resin with low isocyanate demand, superior water resistance and gloss retention making it an excellent choice for maintenance and marine topcoat applications in 340 g/L VOC formulations.

Aquamac® 705 is a high gloss styrene acrylic latex featuring outstanding color and gloss retention as well as an excellent combination of hardness and flexibility. This resin exhibits outstanding early water resistance, salt spray and quv/prohesion corrosion resistance. It provides good airless spray properties that produce high performance metal protective finishes. Coatings formulated with this Aquamac® 705 also exhibit outstanding adhesion to smooth, polished or difficult-to-grip metal surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Acrylamac® 232-2780 is a 70% solids hydroxyl-functional thermosetting solution acrylic resin supplied in mak. It was designed for 420 g/l VOC, two-component acrylic polyurethane clear coat formulations for aerospace applications.

Rezimac® 12-1204 is an epoxy ester exhibiting excellent hardness and adhesion, as well as alkali and abrasion resistance. This resin finds use in concrete coatings and maintenance primers. It can also be used in trade sales applications because of its mineral spirits solubility. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5040 is a low reactivity, high tg carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio 94:6 ratio is also possible . The resulting coatings exhibit excellent flow, exterior durability and mechanical properties, and enhanced impact fusion resistance. Polymac® 5040 is TMA-free.

Polymac® 5050 is a carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio and with primid XL 552 in a 95:5 ratio. The resulting coatings exhibit excellent flexibility, excellent flow and good exterior durability. Polymac® 5050 is TMA-free.

Macopol® HS 214-2122 is a high solids acrylic-modified alkyd with excellent durability, color and gloss retention that can produce 3.5 lbs/gal VOC formulas at good spray viscosity. Manufactured in North America.

Rezimac® WR 73-7331 is a water reducible epoxy ester resin designed for fast dry, corrosion-resistant primers and maintenance coatings. Coatings based on this resin exhibit excellent adhesion and hardness along with excellent corrosion and humidity resistance. Manufactured in North America. All components of this product are listed on the DSL.

Acrylamac® HS 232-2980 is designed for low VOC compliant coatings, this resin has an excellent balance of film properties and is a very good choice for primed and unprimed substrates.

Macopol® 214-1003 is a "Lacquer" dry vehicle that exhibits fast solvent release and very hard film capabilities. It also exhibits very good aliphatic tolerance and takes high pigment loading while retaining excellent gloss in enamel finishes. Manufactured in North America. All components of this product are listed on the DSL.

Acrylamac® 232-1711 is a HAPs-free solution acrylic polyol. This resin exhibits outstanding appearance, gloss, color retention and exterior durability. Manufactured in North America.

Polymac® HS 220-2010 is a high solids polyester resin that is HAPs-free. It is designed to produce 2.8 VOC compliant coatings with superior weatherability and excellent film properties, including skydrol resistance. It is an excellent blending resin for acrylics and similar resins to enhance film performance and VOC in either isocyanate or melamine cured systems. Manufactured in North America.

Polymac® 5190 is a high reactivity, bloom-resistant, storage-stable carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 wt. Ratio. It will cure at 130°c for 25 minutes. The resulting coatings exhibit excellent exterior durability and mechanical properties along with good flow.

Macopol® 214-1118 - a good product for both air-dry or force cure; high gloss, excellent film hardness and fast dry-to-handle in a high solids formula.