Products

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1829 is a medium oil alkyd resin with fast dry and good gloss.Manufactured in North America.

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5900 is a carboxyl-functional polyester resin designed for cure with TGIC in a 90:10 ratio. The resulting coatings exhibit excellent exterior durability, flow and mechanical properties, along with better hardness and solvent resistance than powder coatings based on a 93:7 system. By physical blending coatings based on polymac® 5900 and polymac® 5400, matte finishes can be achieved. Polymac® 5900 is TMA-free.

Duramac® 204-1036 is a positive-drying tofa alkyd that has excellent gloss and color retention. It can be combined with amino resins or used directly in air-dry systems to give excellent exterior durability. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® HS 57-5789 is a high solids polyester resin that is HAPs-free. Coatings based on this resin exhibit outstanding overall performance coupled with excellent gloss retention under accelerated weathering conditions. Enamels formulated with polymac® HS 57-5789 are suitable for interior and exterior applications. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® WR 72-7203 is a water reducible polyester for industrial baking enamels. Coating systems based on this resin exhibit excellent color and color retention, hardness and flexibility. Water reducible coating enamels formulated with this resin are suitable for interior and exterior applications. It is HAPs-free. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Lumicure® 15-1516 is UVEB curable designed for high end applications with good hardness, flexibility and chemical resistance.

Macopol® 214-1008 is a vinyl toluene-modified alkyd copolymer featuring excellent gloss and hardness. This resin formulates easily into paints with very fast air-dry rates, scratch and mar resistance, and it reduces odors. Macopol® 214-1008 can also be used in stain-blocking primers. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1434 is a medium oil alkyd resin that develops sharp gloss, has excellent brushing properties, and has excellent compatibility with aliphatic solvents for aerosol applications. In addition, this resin has sufficient hydroxyl functionality for baking applications where additional adhesion properties are desired. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 57-5816 is a high solids long oil alkyd resin capable of achieving 250 g/l VOC for compliant applications. It does not require high drier loadings to achieve acceptable through-dry characteristics. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 510 is an all acrylic latex polymer exhibiting excellent adhesion and grain crack resistance. This latex finds applications in interior and exterior flat and satin house paints. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 51-5184 is a versatile, medium oil alkyd cut in mineral spirits that can be formulated into finish coatings for architectural and industrial use. This resin exhibits excellent drying and application properties demonstrating good color and gloss retention. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 550 is a styrene acrylic latex that has demonstrated superior water, blush and efflorescence resistance as well as adhesion to masonry surfaces. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 2360 is a very high reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins E.E.W. = 700-950 in 50:50 ratio, this resin offers good flow, good chemical resistance and mechanical properties for interior decorative or primer coatings.

Carbamac® HS 57-5849 is designed to be a modifier for conventional systems to meet 350 g/L VOC limits.

Archemis® QD 201-2195 is a specially modified high solids alkyd supplied at 96% solids in mineral spirits. Coatings formulated at 250 g/l VOC provide excellent set- to-touch, tack-free, dry hard and through-dry characteristics. Gloss and yellowing properties are similar to 450 g/l VOC coatings based on 70% solids conventional long oil alkyds. Formulations at 150 g/l VOC are also possible. Manufactured in North America.

Duramac® 52-5252 is a high quality, non-yellowing short oil alkyd for air-dry or baking finishes. Enamels exhibit excellent properties for both exterior applications and baking applications. Manufactured in North America. All components of this product are listed on the DSL.

Carbamac® HS 57-4372 is a high solids oil-modified urethane designed for exterior applications that require excellent color and gloss retention. Clear varnishes based on this resin can be formulated to meet 350 g/l VOC 2.92 lbs/gal . Manufactured in North America.

Duramac® 56-5619 is a higher solids vehicle that provides good dry and enamel holdout characteristics.

Duramac® 51-5110 is a chain-stopped medium oil alkyd resin. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 55-5543 is a 100% solids alkyd typically used to improve adhesion and wetting properties of exterior architectural latex paints. This resin can also be used as a modifier in lower solids alkyd formulations to lower the VOC of these paints. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 201-1180 is a tofa-based long oil alkyd for use in interior and exterior architectural finishes. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 51-5113 is a high drink soya-based alkyd that possesses excellent drying and working properties. Excellent for color and gloss retention. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 56-5633 is good dry, enamel holdout, and soil removal coating mainly applied in industrial coating applications.

Polymac® 2090 is a medium to low reactivity, carboxyl-functional polyester resin for hybrid powder coatings. In combination with suitable epoxy resins EEW = 700-850 in 60:40 ratio, this resin offers excellent flow, good corrosion resistance, good overall chemical resistance, and very good mechanical properties for interior decorative or primer coatings.

Duramac® HS 57-5866 is a long oil alkyd at 90% solids designed for both interior and exterior architectural coatings that meet VOC levels of less than 250 g/l 2.09 lbs/gal . When properly formulated, the cure response and resistance to yellowing of coatings based on this resin are greatly improved over other high solids long oil alkyds. Manufactured in North America.

Chemacoil® 240-2101 is a unique 100% solids synthetic oil that is recommended for use as a stain vehicle or a modifier for latex paints. It has good dry, flexibility, adhesion and color retention, while not supporting mildew growth. When formulated into a semitransparent stain, Chemacoil® 101 shows good resistance to crocking, or color transfer, when wet. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5160 is a high gloss, general purpose carboxyl-functional polyester resin designed for cure with TGIC at a 93:7 ratio and with primid xl-552 at a 95:5 ratio. The resulting coatings exhibit excellent flow, good flexibility and superior exterior durability. Polymac® 5160 is TMA-free.

Carbamac® HS 57-5794 is a high solids oil-modified urethane designed for interior trade sales applications that require a VOC of less than 350 g/l 2.9 lbs/gal . Coatings based on this resin offer a good balance of properties that includes high gloss, excellent flexibility, good hardness and abrasion resistance, and good air-dry rate. Manufactured in North America.

Rezimac® WR 73-7358 is an air-dry modified polyolefin for penetrating stains on vertical wood surfaces. It can be easily formulated into coatings that exhibit excellent application characteristics, drying properties, early water resistance and package stability. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 50-5003 is a tofa-based long oil alkyd for use in architectural an industrial maintenance coatings. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 575 is designed specifically for use in non-flat architectural coatings and also exhibits many key properties for light-duty industrial maintenance. Paints based on this resin can be readily formulated at VOC levels less than 50 g/l, with performance equal or superior to waterborne paints at higher VOC levels, thus complying with the 2006 SCAQMD regulations without compromising performance.

Duramac® 204-1409 is a medium oil alkyd resin. It is fast drying and can develop sharp gloss with excellent brushing properties. Manufactured in North America. All components of this product are listed on the DSL.

Polymac® 5050 is a carboxyl-functional polyester resin designed for cure with TGIC in a 93:7 ratio and with primid XL 552 in a 95:5 ratio. The resulting coatings exhibit excellent flexibility, excellent flow and good exterior durability. Polymac® 5050 is TMA-free.