Products

Aquamac® 477 styrene acrylic latex polymer was designed specifically for clear wood finishes and provides excellent clarity, hardness and mar resistance. Manufactured in North America. All components of this product are listed on the DSL.

Carbamac® 43-4310 is an oil-modified polyurethane resin with good hardness and abrasion resistance balanced with fast through-dry. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1829 is a medium oil alkyd resin with fast dry and good gloss.Manufactured in North America.

Carbamac® 43-4355 is an oil-modified polyurethane resin. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1036 is a positive-drying tofa alkyd that has excellent gloss and color retention. It can be combined with amino resins or used directly in air-dry systems to give excellent exterior durability. Manufactured in North America. All components of this product are listed on the DSL.

Lumicure® 15-1516 is UVEB curable designed for high end applications with good hardness, flexibility and chemical resistance.

Acrylamac® 16-1066 is fast dry with good color and gloss retention for use as a sole film former or modifying resin; can be formulated into FDA approvable coatings

Rezimac® HS 216-2134 is a high solids low viscosity tung/phenolic resin for use in wood stains and varnishes. Manufactured in North America. All components of this product are listed on the DSL.

Acrylamac® 231-1266 is a solution acrylic resin that exhibits fast dry times and excellent gloss, and has good color retention and good compatibility with other resins. It is a good general purpose resin with excellent pigment dispersion characteristics and balanced properties for use as a sole film former or modifying resin. Manufactured in North America.

Carbamac® HS 57-5849 is designed to be a modifier for conventional systems to meet 350 g/L VOC limits.

Archemis® QD 201-2195 is a specially modified high solids alkyd supplied at 96% solids in mineral spirits. Coatings formulated at 250 g/l VOC provide excellent set- to-touch, tack-free, dry hard and through-dry characteristics. Gloss and yellowing properties are similar to 450 g/l VOC coatings based on 70% solids conventional long oil alkyds. Formulations at 150 g/l VOC are also possible. Manufactured in North America.

Lumicure® 15-1560 is UVEB or peroxide curable with medium reactivity; designed for use as a sandable, flexible wood coating.

Duramac® 56-5619 is a higher solids vehicle that provides good dry and enamel holdout characteristics.

Duramac® 51-5113 is a high drink soya-based alkyd that possesses excellent drying and working properties. Excellent for color and gloss retention. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 56-5633 is good dry, enamel holdout, and soil removal coating mainly applied in industrial coating applications.

Chemacoil® 240-2101 is a unique 100% solids synthetic oil that is recommended for use as a stain vehicle or a modifier for latex paints. It has good dry, flexibility, adhesion and color retention, while not supporting mildew growth. When formulated into a semitransparent stain, Chemacoil® 101 shows good resistance to crocking, or color transfer, when wet. Manufactured in North America. All components of this product are listed on the DSL.

Rezimac® WR 73-7358 is an air-dry modified polyolefin for penetrating stains on vertical wood surfaces. It can be easily formulated into coatings that exhibit excellent application characteristics, drying properties, early water resistance and package stability. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 204-1409 is a medium oil alkyd resin. It is fast drying and can develop sharp gloss with excellent brushing properties. Manufactured in North America. All components of this product are listed on the DSL.

Aquamac® 541 is a styrene acrylic latex polymer that provides outstanding tannin stain block over redwood or cedar. It also exhibits very good stain block over a variety of water-based and solvent-based inks. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® HS 204-2768 is a very durable high solids medium oil alkyd resin. This resin reduces rapidly for improved application properties in high solids enamels. Manufactured in North America.

Duramac® HS 211-1033 is a 100% solids linseed alkyd with outstanding brushing and leveling properties. This resin is compatible with bodied/raw and long oil alkyds. It can easily be formulated into exterior stains, varnishes and other trade sales applications to improve performance. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 51-5150 is a medium oil alkyd that meets the specification requirements of tt-r-266d type iii. It is designed to be used in brushable a.I.M. Enamels. Manufactured in North America. All components of this product are listed on the DSL.

Acrylamac® 231-1195 is a solution acrylic polymer designed for formulation of low odor specialty primers. Manufactured in North America.

Macopol® HS 57-5847 is a high solids VT styrene-modified alkyd designed for use in general industrial applications that require less than 340 g/l 2.83 lbs/gal VOC. This resin can also be used to formulate architectural stain-killing primers and wood primers that will meet 340 g/l VOC. Manufactured in North America. All components of this product are listed on the DSL.

Duramac® 207-1388 has good compatibility with other resins; good viscosity control and enamel holdout; effective modifier for gloss reduction.

Lumicure® 223-6517 is an unsaturated polyester resin designed for use as a wood coating in UV cured systems. It is a HAPs-free resin. Manufactured in North America.

Aquamac® 570 is a styrene acrylic latex designed for formulation of concrete sealers. It provides excellent blush resistance at 100 g/l VOC. Manufactured in North America.