Products

POLYCOR® TOOLING PA CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

DISTITRON® 183 CS - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce isothermal sandwich panels through press and vacuum molding method.

POLYCOR® TOOLING BR CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

DISTITRON® 100 SW - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.

Polynt Group 23 series of gelcoats are formulated specifically for composite mold making. It is formulated with a special base resin that permits an excellent resistance to heat distortion even after repeated use. They provide a high gloss and hard durable surface. These tooling gel coats are formulated ready-to-spray after the addition of the proper amount of appropriate methyl ethyl ketone peroxide or cumene hydro peroxide catalyst. The low opacity formulation help to detect default during spraying process. See section: application in PB-5 polyester tooling because even though manufacturing precautions are used to make tooling gelcoat, a misapplication of these products can produce unacceptable results.

POLYCOR® TOOLING VE PA NEUTRAL 0000 - A pre-accelerated gel coat based on Vinyl Ester unsaturated polyester resin. Cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

Polycor® 965 Neutral Base vinyl ester tooling gel coats are formulated specifically for mold making. These vinyl ester based products are MACT compliant and heat resistant to withstand repeated molding of FRP laminates. Polycor® 965 series vinyl ester tooling gel coats are formulated ready-to-spray after the addition of the proper amount of an appropriate methyl ethyl ketone peroxide catalyst. Polycor® 965 series vinyl ester tooling gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP for boat manufacturing and the reinforced plastics industry.

DISTITRON® I 100 SV1,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through vacuum infusion method.