Products

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Polycor® Fireblock 2335 PA White 9199 - intumescent fire retardant properties that conforms to EN 45545 for internal panels in conjunction with fireblock resin systems. Main applications areas are aeronautical, railway sector etc.

Polynt Group 54X series gelcoat are formulated with a particular mix of polyester resins, for use in applications where sun exposure and weather conditions are a factor. They are suitable for boats, truck cabs, water slides and environments with humidity and direct sun exposure. This unique formulation is easier and quicker gloss recovery with less buffing time to achieve gloss.

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

POLYCOR® LSC NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Polycor® NPG Sanitary PA White 9199 - high reactivity NPG based gel coat offering high resistance to porosity, chemical stain resistance and very good UV resistance. Available in White and off White shades. It is generally used in mass transports applicatons.

Polycor® 947 Neutral Base have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, 947 series gel coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Polynt’s 947 series gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

POLYCOR® TOP COAT BR WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polycor® 948 Base White series enamels are formulated to be used as topcoats on fiberglass laminates such as boat and camper shell interiors. Normally enamels are used as interior finishes or to cover a laminate to provide a colored surface. Polycor® 948 series enamels are available in White or any of the Colors listed in the standard color gel coat color deck. Special Colors are available upon request. They can be made from an isophthalic or iso/npg base resin. Consult a polynt composites sales representative to find out more about a particular product.

Polycor® 943 Base White products are high performance gel coats formulated for use in sanitary and marine applications or any FRP application where resistance to water and blistering are needed. Use of Polycor® 943 gel coats has enabled customers to meet and surpass all requirements of the American national standard for plastic bath tubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 1995, sec. 6.1.1. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Polycor® 943 gel coats are available in whites and a wide range of colors.

Polycor® 969 Base White sanding gel coats have been specifically formulated for use as a sanding substrate. Sanding gel coats are used for FRP parts that will be subsequently painted. They can be used for room temperature and heated molding rtm applications. These products can be post baked at temperatures up to 285°f for as long as two hours. They may also be used for utility, noncritical exterior applications. They are not intended Nor should they be used as a surface coat for the marine, tub/shower or swimming pool industries. They should not be used for water immersion service boat hull, swimming pool, spa, water tank, etc. , even if/when painted. Polycor® 969 series sanding gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced composites production. Some versions in the Polycor® 969 series are formulated to meet south coast air quality management district SCAQMD rule 1162.

ARMORFLEX® 99F PA 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.In conjunction with vinyl ester barrier coats or skin coats will provide a durable osmotic resistant composite suitable for marine hulls.

Polycor® 998 Base White series enamels are formulated to be used as topcoats on fiberglass laminates. Enamels are very similar to gel coats except they cure tack-free on the open surface. Enamels are used to seal and hide a substrate. Normally they are used as interior finishes and yield a pigmented surface. Polycor® 998 series enamels were primarily developed for marine applications; however, they can be used in any FRP application where high performance characteristics are desired. Polycor® 998 series enamels produce a hard, tough, durable coating that reduces maintenance on composites parts. Polycor® 998 series enamels cure to a flat finish. Standard enamels should not be used for water immersion service due to potential water spotting and water blistering. Contact a sales representative for a recommendation if water immersion is required. Polycor® 998 series enamels meet the EPA national emission standards for hazardous air pollutants NESHAP for both marine manufacturing and reinforced composites production. Polycor® 998 series enamels contain wax. The wax is essential to yielding a tack-free surface in the top coating application. The wax also helps to suppress the volatile organic compounds emitted in to the air. Together the low VOC or hap content and wax results in:reduced monomer emissionsless odorsmoother sprayed film less orange peel less overspray due to the wax, Polycor® 998 series enamels should not be used as an in-mold coating where they will be backed by laminate or other materials. Delamination could occur. Enamels require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. These enamels are available in White or any of the Colors listed in the standard gel coat color card. Special Colors are available upon request.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed

POLYCOR® TOP COAT PA WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

EPOVIA ORTHO BR - Orthophthalic,good workability,available in a range of white and or color. Main Applications areas are Agrochemical,Agrobusiness,Solvents etc.

POLYCOR® LSC NPG FLEX PA WHITE 9199 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

DISTITRON® 450 GU - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up,mix with fillers and/or additives method.

Armorguard® 967 Black have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.

Armorflex® 953 Neutral Base gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications, but should be used in any application where water and chemical resistance are needed. Armorflex® 953 series also have exceptional gloss and buffing characteristics. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt’s Armorflex® high gloss buffback® gel coats. Armorflex® 953 series gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1. Gel coats in the 953 series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. Armorflex® high gloss buffback® gel coats are available in the same wide range of Colors as other Polycor® gel coats. Refer to polynt’s Polycor® color card for color selection. Standard Base White Armorflex® is 953wj340.

POLYCOR® ISO NPG PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Polycor® 949 Neutral Base sanding gel coats have been specifically formulated for use as a sanding substrate. Sanding gel coats are used for FRP parts that will be subsequently painted. They can be used for room temperature and heated molding rtm applications. Customer experiences have proven that these products can be post-baked at temperatures up to 285°f for as long as two hours. They may also be used for utility, noncritical exterior applications. They are not intended Nor should they be used as a surface coat for the marine, tub/shower or swimming pool industries. They should not be used for water immersion service boat hull, swimming pool, spa, water tank, etc. , even if/when painted.

Higloss TR® 99R Base White gel coats are high performance products formulated for the reinforced plastics composites industry.

POLYCOR® 960SW Series gel coats are ISO/NPG products formulated for the swimming pool industry. POLYCOR® 960SW Series gel coats meet the EPA National Emission Standards for Hazardous Air Pollutants (NESHAP) for Reinforced Plastic Composites Production - Corrosion Resistant/High Strength or High Performance gel coat. Use of POLYCOR® 960SW gel coat has enabled customers to meet certain requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,IAPMO/ANSI Z124.1 .2-2005,Section 6.1. For swimming pool applications,Polynt recommends that these gel coats be backed by IMEDGE® HPB210 High Performance Barrier Coat,Polynt’s ArmorGuard® vinyl ester barrier coat products,or Polynt’s ArmorStar® VSX vinyl ester skin resins. Use of these materials will create a durable osmotic blister resistant composite that is ideal for swimming pool manufacture. These gel coats are intended and recommended only for the original manufacture of swimming pools; they should not be used for post application (other than patching on the original units). These gel coats are not recommended for the manufacture of spas or saunas. While offering these benefits,these POLYCOR® gel coats have retained the important construction and application qualities expected from Polynt Composites gel coats,such as resistance to tearing and color separation,resistance to porosity,sag resistance,consistent liquid properties,and more. These all add up to higher quality appeal in swimming pools made with Polynt POLYCOR® products.

EPOVIA ORTHO SP - Orthophthalic,good workability,available in a range of white and or color. Main Applications areas are Agrochemical,Agrobusiness,Solvents etc.

Polycor® Fireblock 2335 BR White 9199 - intumescent fire retardant properties that conforms to EN 45545 for internal panels in conjunction with fireblock resin systems. Main applications areas are aeronautical, railway sector etc.

POLYCOR® LP PA WHITE 9199 - A pre-accelerated gel coat based on modified Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This product is formulated for use in a variety of industrials composite parts.

Armorcote® 991 White Base gel coats are advanced technology polyesters developed for lower emissions, improved flexibility, and superior weathering resistance to surface yellowing and chalking. These gel coats have been formulated to be MACT compliant for the fiberglass industry. Armorcote® 991 gel coats are designed to meet the critical requirements of the marine industry. Both accelerated and 45° south florida exposure testing reveal less yellowing than standard gel coats, and considerably less loss of gloss. Armorcote® 991 gel coats are formulated to meet the EPA national emission standards for hazardous air pollutants NESHAP for boat manufacturers. Contact a polynt composites representative for actual hap content. Gel coats in the armorcote® 991 series offer blister resistance comparable to iso/npg gel coats. This coating system is sag resistant and ready to spray, requiring only the proper addition of an appropriate methyl ethyl ketone peroxide to cure. The product code for Base White in the improved armorcote® 991 series is 991wk173.

Polycor® 943 Neutral Base are high performance gel coats formulated for use in sanitary and marine applications or any FRP application where resistance to water and blistering are needed. Use of Polycor® 943 gel coats has enabled customers to meet and surpass all requirements of the American national standard for plastic bath tubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 1995, sec. 6.1.1. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Polycor® 943 gel coats are available in whites and a wide range of colors.

Bathcote® HF 99S Base White gel coats are high performance products formulated for the sanitary ware industry. These gel coats have lower volatile organic compounds VOC than conventional gel coats. Bathcote® HF 99S series gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced plastic composites production. Bathcote® HF 99S series gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors, and shower stalls, IAPMO/ANSI Z124.1.2-2005, section 6.1. This product series has received certification from the canadian standards association CSA and is eligible to bear the CSA trademark.

POLYCOR® HWR PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed. Offering superior weathering properties for high end parts.

Bathcote® 992 Base White gel coats are high performance products formulated for the sanitary-ware industries. These gel coats have low volatile organic compound properties. Bathcote® gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced composites construction. While offering these benefits, polynt composites gel coats have retained the important construction application qualities customers have come to expect from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; good patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt composites' 992 series gel coats. The bathcote® 992 series resist blistering because they are formulated to provide high performance against water and certain chemicals. These gel coats were primarily developed for sanitary applications. These gel coats provide durable, reduced maintenance products. Polynt composites gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, IAPMO/ANSI Z124.1 .2 -2005, section 6.1. This product series has received certification from the canadian standards association CSA and is eligible to bear the CSA trademark. These gel coats require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure.

POLYCOR® HWR BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed. Offering superior weathering properties for high end parts.