Products

POLYTONE™ K-94 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability

POLYTONE™ PF 201 is a phenol - formaldehyde two-step resin containing hexa.

POLYTONE™ AP 109 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

These resins are highly effective in imparting gloss, adhesiveness, leveling and also in increasing the solid content leading to a reduction in the VOC. The hydroxyl polarity leads to better adhesion and wetting of pigments and surfaces.

POLYTONE™ PA 351 is an alcohol soluble non reactive polyamide resin in solid form suitable for flexographic printing inks.

POLYTONE™ AP 108 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

POLYTONE™ P 142 is a high melting modified Phenolic resin suitable for manufacture of letterpress inks, offset printing inks with excellent water repellant properties.

POLYTONE™ PA 303 is a polymeric fatty acid based co-solvent grade non reactive polyamide resin in solid form suitable for flexographic and gravure printing inks.

POLYTONE™ AP 131 is a non heat reactive thermoplastic phenol-alkyl phenol resin designed for use in synthetic and natural rubber based compounds in Applicationss that require high hardness compounds that process easily.

POLYTONETM K-95 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

POLYTONE™ P 141 is a high melting modified Phenolic resin suitable for manufacture of offset printing inks where low body is required.

POLYTONE™ P 145 is a high melting, high molecular weight modified Phenolic resin suitable for the manufacture of high grade quickset / sheet fed inks - imparting excellent gloss and giving sharp prints with excellent press stability.

POLYTONE P 144 is a high melting, high molecular weight modified Phenolic resin suitable for the manufacture of high grade quick set / sheet fed inks - imparting excellent gloss and giving sharp prints with excellent press stability.

POLYTONE™ AP 113 is a heat reactive alkyl phenolic resin formulated for use cross linking of butyl rubber mainly used in the tire industry

POLYTONE™ M 135 is used in Spirit soluble varnishes, N.C. Lacquers, Road Marking Paints, Liquid Inks etc.

POLYTONE™ AP 111 is a heat reactive alkyl Phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type.

POLYTONE™ P 140 is a modified phenolic resin for use with drying oil, such as linseed & tung oil.

POLYTONE™ AP 114 is a heat reactive alkyl Phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type

POLYTONE™ ABR 1014 has the lowest molecular weight. Used in lacquers and gravure inks requiring low Viscocity at high solids.

POLYTONE™ M 131 is used in Varnishes, Paints and Over Print Varnishes, N.C. Lacquers etc.

POLYTONE™ M 130 is used for improving the film hardness of nitrocellulose and chlorinated rubber paints.

POLYTONE™ AP 133 is a non heat reactive thermoplastic unmodified phenolic resin designed to give a consistent performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, excellent chip and abrasion resistance when cross linked with a methylene donor.

POLYTONETM K-96 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

POLYTONE™ AP 113A is a heat reactive alkyl phenolic resin formulated for use cross linking of butyl rubber mainly used in the tire industry.

POLYTONE™ PA 302 is a polymeric fatty acid based co-solvent grade non reactive polyamide resin in solid form suitable for flexographic and gravure printing inks.

POLYTONE™ M 136 is used in Paper Varnishes, Liquid Inks etc.

POLYTONETM K-97 HH is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

POLYTONE™ P-143 is a high melting modified Phenolic resin suitable for manufacture of high gloss quick set sheet fed and web offset inks

POLYTONE™ AP 112 is a heat reactive alkyl phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type.

POLYTONE™ AP 132 is a non heat reactive thermoplastic unmodified phenol-formaldehyde resin designed to give a consistent performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, excellent chip and abrasion resistance when cross linked with a methylene donor.

POLYTONE™ AP 130 is a non heat reactive thermoplastic alkyl phenolic resin designed to give a consistent performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, excellent chip and abrasion resistance when cross linked with a methylene donor.

POLYTONETM K-97 HH is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability. POLYTONE K-97

POLYTONE™ AP 110 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.