company tower banner

Products

Polyplastics Group

Engineering & Specialty PolymersProduct Families

Blends & Alloys

Blends & Alloys

12 Products found on Polyplastics Group in Engineering & Specialty Polymers

TDSWith TDS

Duracon® NW-02 banner

Duracon® NW-02

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1360.0 - 1360.0 kg/m³
Flexural Modulus:2200.0 - 2200.0 MPa
Tensile Strength:52.0 - 52.0 MPa

Polyplastics Group Duracon® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated

Duracon® AW-01 banner

Duracon® AW-01

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1370.0 - 1370.0 kg/m³
Flexural Modulus:2200.0 - 2200.0 MPa
Tensile Strength:54.0 - 54.0 MPa

Polyplastics Group Duracon® AW-01 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated

Duracon® SW-01 banner

Duracon® SW-01

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1420.0 - 1420.0 kg/m³
Flexural Modulus:2500.0 - 2500.0 MPa
Tensile Strength:50.0 - 50.0 MPa

Polyplastics Group Duracon® SW-01 is an Acetal (POM) Copolymer + PE product filled with 10% calcium carbonate. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated

Duracon® SW-41 banner

Duracon® SW-41

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1510.0 - 1510.0 kg/m³
Flexural Modulus:4900.0 - 4900.0 MPa
Tensile Strength:59.0 - 59.0 MPa

Polyplastics Group Duracon® SW-41 is an Acetal (POM) Copolymer + PE product filled with 20% mineral. It can be processed by injection molding and is available in Asia Pacific or North America.Characteristics include: Flame Rated Rigid

Duracon® AW-01LV banner

Duracon® AW-01LV

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1370.0 - 1370.0 kg/m³
Flexural Modulus:2100.0 - 2100.0 MPa
Tensile Strength:52.0 - 52.0 MPa

Polyplastics Group Duracon® AW-01LV is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Duracon® TW-31 banner

Duracon® TW-31

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1470.0 - 1470.0 kg/m³
Flexural Modulus:3450.0 - 3450.0 MPa
Tensile Strength:47.0 - 47.0 MPa

Polyplastics Group Duracon® TW-31 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Rigid Warp Resistant

Duracon® SW-22 banner

Duracon® SW-22

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1470.0 - 1470.0 kg/m³
Flexural Modulus:3200.0 - 3200.0 MPa
Tensile Strength:50.0 - 50.0 MPa

Polyplastics Group Duracon® SW-22 is an Acetal (POM) Copolymer + PE product filled with 10% mineral. It can be processed by injection molding and is available in Asia Pacific or North America.Characteristics include: Flame Rated High Flow Rigid

Duracon® AW-09 banner

Duracon® AW-09

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1370.0 - 1370.0 kg/m³
Flexural Modulus:2050.0 - 2050.0 MPa
Tensile Strength:54.0 - 54.0 MPa

Polyplastics Group Duracon® AW-09 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: High Viscosity Lubricated

Duracon® NW-02LV banner

Duracon® NW-02LV

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1360.0 - 1360.0 kg/m³
Flexural Modulus:2100.0 - 2100.0 MPa
Tensile Strength:52.0 - 52.0 MPa

Polyplastics Group Duracon® NW-02LV is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Duracon® EW-02 banner

Duracon® EW-02

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1370.0 - 1370.0 kg/m³
Flexural Modulus:2500.0 - 2500.0 MPa
Tensile Strength:38.0 - 38.0 MPa

Polyplastics Group Duracon® EW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Antistatic Carbon Black Conductive

Duracon® SW-01LV banner

Duracon® SW-01LV

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1420.0 - 1420.0 kg/m³
Flexural Modulus:2500.0 - 2500.0 MPa
Tensile Strength:50.0 - 50.0 MPa

Polyplastics Group Duracon® SW-01LV is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Duracon® TW-51 banner

Duracon® TW-51

Polymer Name:POM/PE Alloy
Processing Methods:Injection Molding
Density:1540.0 - 1540.0 kg/m³
Flexural Modulus:4450.0 - 4450.0 MPa
Tensile Strength:40.0 - 40.0 MPa

Polyplastics Group Duracon® TW-51 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Rigid Warp Resistant