Products

Polyplastics Group Duranex® 3105A is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Adhesion

Duranex® 2016 by Polyplastics Group is comprised of Polybutylene Terephthalate. It is commonly used

Polyplastics Group Durafide® 6150T6 is a Polyphenylene Sulfide (PPS) product filled with 50% glass\mineral. It is available in Asia Pacific, Europe, or North America. Primary characteristic: impact resistant.

DURAFIDE® 0220U9 is a Polyphenylene Sulfide (PPS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: impact resistant.

Polyplastics Group Duracon® M270-45LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Weather Resistant

Armamid™ PA GF 50-1 by Polyplastics Group is comprised of Polyamide (unspecified). It is commonly used It is available in BMC - Bulk Molding Compound form.

Polyplastics Group Duracon® FP15X is an Acetal (POM) Copolymer product. It can be processed by extrusion or injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Polyplastics Group Durafide® 6165A7S is a Polyphenylene Sulfide (PPS) product filled with 65% glass\mineral. It is available in Asia Pacific, Europe, or North America. Primary characteristic: chemical resistant.

Duranex® 551HS by Polyplastics Group is comprised of Polybutylene Terephthalate. It is commonly used

Polyplastics Group Duranex® 2000 is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated High Flow

Polyplastics Group Duranex® 3106 is a Polybutylene Terephthalate + PET (PBT+PET) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Esthetics High Gloss

Tepcon® M450 by Polyplastics Group is comprised of Polyacetal Copolymer. It is commonly used

Polyplastics Group Duranex® MH6304 T01 is a Polycarbonate + PBT (PC+PBT) product filled with 30% glass\mineral. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant

Polyplastics Group Duracon® TR-10D is an Acetal (POM) Copolymer product filled with 10% talc. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Rigid Warp Resistant

Polyplastics Group Duracon® SW-01LV is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Polyplastics Group Duracon® EB-08 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Antistatic Carbon Black Conductive

Polyplastics Group Duranex® 3200 is a Polybutylene Terephthalate (PBT) product filled with 20% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Armamid™ PA GF 30-1EHSM by Polyplastics Group is comprised of Polyamide (unspecified). It is commonly used It is available in BMC - Bulk Molding Compound form.

Polyplastics Group Duracon® TW-31 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Rigid Warp Resistant

Polyplastics Group Topas® 6013M-07Product DescriptionTOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility TOPAS 5013S-04 - high flow grade without lubricant Topas® 6013M-07Topas® 6013M-07 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Copolymer Good Esthetics

Polyplastics Group Duracon® OL-10 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated Wear Resistant

Polyplastics Group Duranex® CN7000NN BB is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.

Polyplastics Group Laperos® A150F is a Liquid Crystal Polymer (LCP) product filled with 50% glass flake. It is available in Asia Pacific.Characteristics include: Flame Rated High Strength High Toughness Warp Resistant

Duranex® 200FP by Polyplastics Group is comprised of Polybutylene Terephthalate. It is commonly used

Polyplastics Group Duranex® 711SA is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) product filled with 30% glass\mica. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant Wear Resistant

Armamid™ PA GF 30-1T by Polyplastics Group is comprised of Polyamide (unspecified). It is commonly used It is available in BMC - Bulk Molding Compound form.

Polyplastics Group Duranex® 315NF is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant Halogen Free

Polyplastics Group Duranex® C5330N is a Polybutylene Terephthalate + PET (PBT+PET) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Esthetics High Gloss

Polyplastics Group Duranex® 209AW is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant Wear Resistant

Polyplastics Group Topas® Elastomer E-140 is a semicrystalline cyclic olefin material with flexibility. It is a fairly stiff elastomer which can be extruded and injection molded, and can be blended with other TOPAS grades, other olefin resins and elastomers. For an elastomer, E-140 features high moisture barrier and has excellent clarity in thin sections or films. Secondary Tg of -6°C is relatively insignificant in terms of E-140 properties such as low temperature brittleness. The major Tg is below -90°C, while the melting point is about 84°C.

Polyplastics Group Durafide® 6165A7 is a Polyphenylene Sulfide (PPS) product filled with 60% glass\mineral. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Dimensional Stability

Polyplastics Group Duranex® 330LC is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Polyplastics Group Duranex® RH1150 T01 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Polyplastics Group Duranex® CN5330N B is a Polybutylene Terephthalate + PET (PBT+PET) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.

Polyplastics Group Durafide® 6565A7 is a Polyphenylene Sulfide (PPS) product filled with 60% glass\mineral. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Adhesion

Polyplastics Group Durafide® 6165A4 is a Polyphenylene Sulfide (PPS) product filled with 65% glass\mineral. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Dimensional Stability