Products

N73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN70.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications Pumps Valves

Perlast® G76W is an ivory colored perfluoroelastomer developed as a cost effective material for use in demanding applications within the industrial, analytical and automotive sectors.Perlast® G76W incorporates a reinforcing filler system which delivers outstanding chemical resistance against a wide range of chemicals and solvents typically used in paint spray, chromatography, mass spectroscopy, detergent dispensers, printing and industrial applications.Perlast® G76W provides excellent sealing performance in cost sensitive applications and its superior chemical resistance is complimented by exceptionally low compression set, high elongation and high tensile strength, ensuring maximum sealing efficiency. High elongation allows easy installation into small diameter piston grooves.Key Attributes Cost effective high performance perfluoroelastomer Outstanding solvent resistance Excellent resistance to reactive chemistries and oxidizing agents Low compression set High sealing efficiency Strong physical characteristics Easy to install Typical Applications O-rings Static & Dynamic seals Lip Seals Check Valves Miniature Pumps & Valves Paint Spray Heads Ink Jet heads Detergent Dispensers

V76F is a peroxide-cured tetrapolymer (70% fluorine) formulated for high performance sealing applications in today's aggressive industrial environments.V76F has been developed to provide outstanding resistance to solvents, fuels, hot water and steam (above 150°C/302°F).V76F also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in fuel systems, chemical processing equipment and certain critical diesel engine locations.Alternative to lead-containing (litharge-cured) steam resistant grades.Key Attributes Excellent resistance to fuels and solvents Excellent resistance to oils, steam/water and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (e.g. fuel systems, cooling ports) Biofuel processing equipment Heat exchangers Paper/pulp processing equipment Hot water/steam systems

V75G is a fluoroelastomer (FKM) material developed to offer good compression set performance and good all-round chemical resistance in operating temperatures up to 200°C (392°F).This material is used extensively in vacuum applications due to its low gas permeability and diesel engines where its broad chemical resistance, at medium operating temperatures, provides excellent long- term service life.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.V75G meets ASTM D2000 line call-out M2HK707, A1-10, B38, EF31, EO78, F15, Z1, Z2 (Z1 = color green & Z2 = comp-set 30% max.).Key Attributes Excellent long-term sealing performance Broad chemical resistance Colored green for easy identification Typical Applications Vacuum equipment Mechanical seals Marine diesel engines: Cylinder liners, Injection systems, Low temp. exhaust valve seals, Cooling channels

V72G is a fluoroelastomer (FKM) rubber, a Copolymer of vinylidene fluoride and hexafluoropropylene, colored green for easy identification.FKM materials typically provide excellent resistance to heat, aliphatic and aromatic hydrocarbons, chlorinated solvents and petroleum fluids. Fluoroelastomers offer superior O-ring sealing force retention over most other oil-heat resistant elastomers, with the exception of perfluoroelastomers.V72G is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent heat resistance and long-term sealing performance Broad chemical resistance Superior mechanical properties Colored green for easy identification Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Chemical processing equipment Pumps Valves

N83B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N83B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN80.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace Applications

V75J is a peroxide-cured terpolymer formulated for high performance sealing applications in today's aggressive industrial environments.V75J has been developed to provide outstanding resistance to hot water and steam (above 150°C/302°F) without the use of litharge (lead oxide) curatives.V75J also offers superior resistance to acids, oils, coolants and hydraulic fluids, making it ideal for use in chemical processing equipment and certain critical diesel engine locations.Key Attributes Excellent resistance to hot water and steam Excellent resistance to oils, fuels and hydraulic fluids High temperature performance Superior long-term sealing performance Typical Applications Marine diesel engines (valve seats & liner rings) Heat exchangers Paper/pulp processing equipment Hot water/steam systems

Red Silicone 55-65. Diesel cylinder liner ring grade. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Excellent heat resistance and low temperature flexibility combined with low compression set performance. Used primarily for diesel cylinder liner O-Rings (coolant sealing). Although silicone will swell in petroleum lubricants, this is not necessarily detrimental in static sealing applications.

N63B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N63B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN60.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications

N93B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N93B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code MN90.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace Applications

Z93B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.HNBR materials typically provide superior heat resistance, excellent mechanical properties, combined with exceptional resistance to oils, hydrogen sulfide, amines present in crude oil, high energy radiation, ozone and weathering.Z93B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 2 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent chemical resistance Excellent wear resistance and mechanical properties Accepted by M.O.D. to Def. Stan. NES 337 Meets ASTM D2000/SAE J200 line call-out M4DH716, A26, B36, EO16, EO36, F17. Typical Applications Naval ships and submarines Oilfield applications

N93H is a Copolymer of acrylonitrile and butadiene with a high ACN content of >45%.NBR materials typically provide excellent resistance to petroleum-based oils, fuels and greases, as well as, very low gas permeability, ozone resistance, plus exceptional heat aging and mechanical properties.N93H is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines. Material code HN90.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent resistance to aliphatic hydrocarbon oils, fuels and greases. Very low gas permeability Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Aerospace applications

Z73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.HNBR materials typically provide superior heat resistance, excellent mechanical properties, combined with exceptional resistance to oils, hydrogen sulfide, amines present in crude oil, high energy radiation, ozone and weathering.Z73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 2 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent chemical resistance Excellent wear resistance and mechanical properties Accepted by M.O.D. to Def. Stan. NES 337 Meets ASTM D2000/SAE J200 line call-out M4DH716, A26, B36, EO16, EO36, F17. Typical Applications Naval ships and submarines Oilfield applications