Products

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

V72G is a fluoroelastomer (FKM) rubber, a Copolymer of vinylidene fluoride and hexafluoropropylene, colored green for easy identification.FKM materials typically provide excellent resistance to heat, aliphatic and aromatic hydrocarbons, chlorinated solvents and petroleum fluids. Fluoroelastomers offer superior O-ring sealing force retention over most other oil-heat resistant elastomers, with the exception of perfluoroelastomers.V72G is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 1 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent heat resistance and long-term sealing performance Broad chemical resistance Superior mechanical properties Colored green for easy identification Accepted by M.O.D. to Def. Stan. NES 337 Typical Applications Naval ships and submarines Chemical processing equipment Pumps Valves

Perlast® G70A uses a unique molecular cross-linking technology to offer the broadest range of chemical resistance of any FFKM with the ability to operate up to a maximum temperature of 260°C (500°F).An extremely versatile material, Perlast® G70A is suitable for 90% of sealing applications encountered in the chemical processing and refining industries, providing excellent resistance to highly aggressive acids, amines, chlorine and solvent-based chemistries.Perlast® G70A is available as fully molded O-rings (any size up to 2m/6.5ft internal diameter), custom shapes and profiles.Key Attributes Ultimate chemical resistance to a wide range of chemicals Exceptional acid and amine resistance Excellent steam resistance Superior mechanical properties High sealing efficiency Typical Applications Pumps Valves Mechanical seals Compressors (high H2S concentration environments) Pressure vessels Diesel engines (pre-chambers and exhaust systems) Couplings & Fittings Custom shapes and profiles

Description Perlast® G70H provides optimal performance in high-temperature, chemically and mechanically demanding environments. This highly reinforced material offers extended seal life, offering low plasma etch rates in flat panel and thin-film solar CVD processes and the high mechanical strength needed to cope with the high forces repeatedly applied in these large scale applications.Perlast® G70H is available as fully molded O-rings (any size up to 2m/6.5ft internal diameter) and fully molded formed slit valve door seals up to 3m in length for generation 10 and above.Key Attributes Excellent plasma resistance High temperature performance High mechanical strength High abrasion resistance Extremely low out-gassing properties Typical Applications Slit valve door seals ISO valve seals Load lock seals NW / KF / ISO O-rings

Black, Fluoroelastomer Rubber, 66-75 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. ASTM designation = FKM. ISO designation = FPM. Formulated using only those ingredients determined by the United States Food and Drug Administration (FDA) in accordance with Code of Federal Regulations Title 21 (CFR21) Part 177.2600.WRC approved for cold water applications. WRC Reference No: 0907521FDA grade, formulated for use as product contact surfaces in dairy equipment.

N70M is a NBR copolymer that provides excellent resistance to petroleum based oils and fuels.N70M has been developed to offer excellent mechanical properties such as compression set, tear and abrasion resistance, making it ideal for dynamic applications. Good water resistance is also a characteristic of this material.Meets BS2751 BA70 and ASTM D2000/SAE J200 line call-out M2BG 714, B14, EA14, EF11, EF21, EO14, EO34 and F17.Key Attributes Low temperature flexibility Stability to mineral oils and hydraulic fluids Good resilience Typical Applications Topside pipe systems General purpose sealing applications

V75SR is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V75SR provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V75SR can be used for all types of applications requiring FDA, 3A and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Excellent steam resistance up to 200°C (+392°F) Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) 3A Sanitary Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

V70SW is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V70SW provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V70SW can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Key Attributes Excellent steam resistance up to 200°C Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

Z70F is a medium acrylonitrile (ACN = 34%), HNBR compound formulated using only those ingredients determined by the US Food and Drug Administration (FDA).The high mechanical strength of Z70F provides excellent wear and abrasion resistant properties when used in dynamic applications.Z70F offers excellent steam and chemical resistance to a broad range of media, making it ideal for use in various applications requiring FDA and 3A compliance. It is suitable for use in all food contact applications including dry, aqueous and fatty media.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed profiles and components.Key Attributes Excellent chemical and steam resistance Higher maximum operating temperature than standard nitrile (NBR) High mechanical strength FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) 3A Sanitary Standard 18-03 Class 3 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use in food and dairy production and processing equipment, for both static and dynamic applications.

S80U is a high transparency grade of silicone rubber intended for use in food, dairy, brewing, potable water, pharmaceutical and biomedical applications. Platinum-cured silicone is odorless, tasteless and non toxic. Seals made from S80U are resistant to repeated sterilizing, autoclaving and cleaning agents commonly used in these industries.Unlike traditional peroxide-cure methods, platinum curing results in a smooth contact surface finish and a high degree of purity. No residue substances such as benzoic acid, peroxides, ketones are produced during manufacturing, which can be transferred from the seal to critical hygienic products.Key Attributes FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3A Sanitary Standard 18-03 Class 1 compliant. Formulated to BS2494 Type ‘W' and (Water Regulations Advisory Scheme WRAS - formerly Water Research Council WRC) in accordance with BS6920. Approval No. 0005509. BGV XV compliant. Good mechanical and physical properties Chemically stable over a temperature range of -60°C to +200°C. Withstands sterilizing and autoclaving procedures Free from Animal Derived Ingredients (ADI) Typical Applications Food processing and packaging equipment Pharmaceutical and biomedical apparatus Hygienic seals in dairy equipment Potable and high-purity water applications

Detectaseal® XE7H is the latest advance in contamination detection and containment. This unique range of metal detectable elastomer compounds has been developed specifically to meet the stringent demands of the pharmaceutical and food processing industries.The Detectaseal® fragments as small as 2-3mm can be easily identified by in-line metal detection equipment used to detect product contaminated by process lines.The Detectaseal® range includes Nitrile, Silicone, EPDM and Fluoropolymer (FKM) elastomer compounds (all FDA-compliant) available in blue and black, which allows the most appropriate material to be selected for every application.Detectaseal® compounds can be molded into O-rings and custom components.Key Attributes Early detection and containment of contamination: Reduced product loss, Increased productivity Blue seals to assist in easy identification Excellent mechanical properties and sealing efficiency Exceptional oil and heat resistance FDA-compliant elastomer materials Free from animal-derived ingredients Typical Applications Static and dynamic sealing applications Food processing equipment Pharmaceutical drug manufacturing equipment Bioscience industry.

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

A dark brown high performance polymer containing a unique self- reinforcing polymer structure, developed specifically for critical semiconductor applications. The high purity of the polymer combined with the absence of any fillers makes this polymer suitable for processes involving lower feature sizes. This material has a low coefficient of thermal expansion, low compression set and has an extremely low etch rate in aggressive plasma environments.Key Attributes Exceptionally pure - does not contain any fillers which may cause particulation problems. Outstanding plasma resistance - ideal for Chlorine, Fluorine & Oxygen chemistries. Exceptionally low plasma etch rate Low thermal expansion Retro-fits existing O-ring grooves (including FKM & FFKM grooves) Low permeation Low out-gassing Low adhesion (reduced sticking) Low friction, high strength and high modulus make K13X ideal for constant force dynamic applications. Typical Applications Dynamic seals Static seals Wafer-handling products

V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications.V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance.V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold operating environments Seal applications that are exposed to cold situations Applications that demand high variations in temperature

V75W is a copolymer FKM elastomer material suitable for repeated use in equipment associated with the production of dry, aqueous and fatty foodstuffs intended for human consumption.Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA), V75W has undergone extraction testing in accordance with Code of Federal Regulations Title 21 (CFR21), Section 177.2600.V75W also complies with the requirements of USP 25, NF20, 2002, Class 6 and has been tested in accordance with 3-A Sanitary Standards 18-03 Class 1.Key Attributes Low compression set provides long-term sealing performance. Excellent resistance to oils, fuels and hydraulic fluids. FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Sanitary Standards 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI-free) Typical Applications Pharmaceutical and bio-analytical equipment Food processing equipment Industrial applications (eg. paint spray and printing)