Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- VOC compliant
- No solvents
- 100% solid
- Non - sag
Applications & Uses
- Applications
- Application Method
- Cure Method
- Uses
XtraBond® 9500NC can be used for a variety of applications including, but not limited to, window & door flashing, new construction, stucco, siding, etc.
- Direction for Use
- For best results, prepare a clean surface.
- Cut nozzle to desired bead size.
- Apply with caulking gun, forcing sealant onto the substrate, then tool if needed.
- Clean excess material with mineral spirits or similar solvent.
- Surface Preparation
- The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion.
- Do not apply if surface is contaminated.
- It is recommended to test all substrates prior to applications.
- Primers are not required for most substrates.
- Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)
Depth
Width 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/2” 99 49 33 24 20 16 14 12 3/8” 24 20 12 10 8 7 6 1/4” 11 8 6 5 5 4 1/8” 6 5 4 3 3 All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use
Properties
- Color
- Physico-Chemical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity (at 4 rpm) | approx. 8,00,000 | cP | RV T-E |
| Movement Capacity | 25.0 | % | — |
| Service Temperature | -40 to 200 | °F | — |
| VOC (Less water and exempt solvent) | max. 10 | g/L | — |
| Cure Rate (Bead, in 48 hours) | 0.25 | inch | — |
| Sag/Slump | max. 0.2 | inch | — |
| Density | approx. 14.8 | lbs./gal | — |
| Skin Time (at 70°F, 50% RH) | max. 20 | minutes | — |
| Tack Free Time (at 70°F, 50% RH) | max. 60 | minutes | — |
| Tensile Strength | 60 - 100 | psi | — |
| Shore A | 25 - 35 | — | — |
| Staining | None | — | — |
Regulatory & Compliance
- Specifications
XtraBond®9500NC meets or exceeds the requirements of ASTM C920 Type S, Grade NS, Class 25, Use NT, G, A, M. Federal Specification TT-S-00230C Type Il, Class A.
Packaging & Availability
- Packaging Type
- Packaging
- Cartridges
- Sausages
- Pails
- Drums
Storage & Handling
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container.
- Shelf Life
- Cartridges/sausages, use within 10 months from date of manufacture.
- Pails/drums, use within 6 months from date of manufacture.