Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Fast cure at a wide range of temperatures
- Textured appearance
- Paintable in 2 hours
- Very low VOCs
- No solvents
- Non - sag
Applications & Uses
- Markets
- Applications
- Application Method
- Cure Method
- Uses
XtraBond® 9500TX can be used for a variety of applications including, but not limited to, perimeter sealing of windows, doors & skylights, waterproof membrane, industrial, stucco, siding, etc.
- Direction for Use
- For Best Results, prepare a clean, dry surface.
- Apply with a caulking gun forcing sealant onto the substrate, then tool if needed.
- Can be applied in a wide range of temperatures.
- Clean excess material with mineral spirits or similar solvent.
- Surface Preparation
- The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion.
- Do not apply if surface is contaminated.
- It is recommended to test all substrates prior to applications.
- Primers are not required for most substrates.
- Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)
Depth
Width 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/2” 99 49 33 24 20 16 14 12 3/8” 24 20 12 10 8 7 6 1/4” 11 8 6 5 5 4 1/8” 6 5 4 3 3 Note : All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use
Regulatory & Compliance
- Specifications
XtraBond® 9500TX meets or exceeds the requirements of ASTM C920 Type S, Grade NS, Class 12.5, Use NT, G, A, M. Federal specification TT-S-00230C Type II, Class B.
Packaging & Availability
- Packaging Type
- Packaging
- Cartridges
- Sausages
- Pails
- Drums
Storage & Handling
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container.