Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Use for interior and exterior
- Wide application temperature range (-40°F to 140°F)
- Excellent for use with fiber cement
- Permanently flexible
- Paintable in 2 hours
- Superior adhesion
- Use for vertical and horizontal surfaces
- Aggressive adhesion to common construction substrates
- Low vocs
- Part of premier’s green advantage program™
- Part of premier’s Xtraguard® weather defense system™
- Easy gunning & tooling
- Non-sag
Applications & Uses
- Applications
- Application Area
- Application Method
- Cure Method
- Uses
XtraBond® 9550 can be used for a variety of applications including, but not limited to, doors & windows, roofng, fireplaces, marble & granite, architectural metals, siding, RV/trailer manufacturing & repair, etc.
- Direction for Use
- For best results, prepare a clean surface.
- Cut nozzle to desired bead size.
- Apply with caulking gun, forcing sealant onto the substrate, then tool if needed.
- Clean excess material with mineral spirits or similar solvent.
- Surface Preparation
The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion. Do not apply if surface is contaminated. It is recommended to test all substrates prior to applications. Primers are not required for most substrates.
- Curing
Under normal conditions (70°F, 50% RH) material cures at roughly ¼” in 48 hours. The higher the humidity and temperature, the faster the cure.
- Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)
Depth
Width 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/2” 99 49 33 24 20 16 14 12 3/8” 24 20 12 10 8 7 6 1/4” 11 8 6 5 5 4 1/8” 6 5 4 3 3 Note : All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use
Properties
- Physico-Chemical Properties
Value | Units | Test Method / Conditions | |
Shore A | 25 - 35 | — | ASTM C661 |
Movement Capacity | 50.0 | % | ASTM C719 |
Sag/Slump | max. 0.2 | inch | ASTM D2202 |
Staining | None | — | ASTM D2203 |
100% Modulus of Elasticity | 100 - 200 | psi | ASTM D412 |
Tensile Strength | 150 - 250 | psi | ASTM D412 |
UV Rating (after 2500 hours) | No discoloration or change in appearance | — | ASTM G154 |
Flash Point | Solvent free | — | Closed Cup |
VOC (Less water and exempt solvent) | max. 14 | g/L | EPA Method 24 |
Service Temperature | -40 to 200 | °F | Internal Method |
Cure Rate (Bead, in 8 hours) | 0.25 | inch | Internal Method |
Density | approx. 13.5 | lbs./gal | Internal Method |
Skin Time (at 70°F, 50% RH) | max. 20 | minutes | Internal Method |
Tack Free Time (at 70°F, 50% RH) | max. 60 | minutes | Internal Method |
Viscosity (at 4 rpm) | approx. 5,00,000 | cP | RV T-E |
Regulatory & Compliance
- Specifications
XtraBond® 9550 meets or exceeds the requirements of ASTM C920 Type S, Grade NS, Class 50, Use NT, G, A, M. Federal Speci_x001e_cation TT-S-00230C Type II Class A.
Packaging & Availability
- Packaging Type
- Packaging
- 10.1 fl. oz. Cartridge : 24/case, 80 cases/pallet
- 20.0 fl. oz. Sausage : 20/case, 60 cases/pallet
- 5 Gallon Pail : 36 pails/pallet
- 52 Gallon Drum
Storage & Handling
- Clean - Up
Clean excess material with mineral spirits or similar solvent
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container.
- Shelf Life
- Cartridges/sausages, use within 10 months from date of manufacture.
- Pails/drums, use within 6 months from date of manufacture.