Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Fast cure at a wide range of temperatures
- Paintable in 2 hours
- Very low VOCs
- Self - leveling
- No solvents
Applications & Uses
- Markets
- Applications
- Application Area
- Uses
XtraBond® 9500SL can be used for a variety of applications including, but not limited to concrete expansion joints & cracks, horizontal joints, roof joint seals, transportation, industrial, etc.
- Direction for Use
- For best results, prepare clean surface.
- Cut nozzle to desired bead size.
- Apply with caulking gun, forcing sealant onto the substrate, then tool if needed.
- Clean excess material with mineral spirits or similar solvent.
- Surface Preparation
The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion. Do not apply if surface is contaminated. It is recommended to test all substrates prior to applications.
- Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)
Depth
Width 1/8” 1/4” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 1/2” 99 49 33 24 20 16 14 12 3/8” 24 20 12 10 8 7 6 1/4” 11 8 6 5 5 4 1/8” 6 5 4 3 3 Note : All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use.
Properties
- Physico-Chemical Properties
| Value | Units | Test Method / Conditions | |
| Shore A | 25 - 35 | — | ASTM C661 |
| Movement Capacity | 25.0 | % | ASTM C719 |
| Staining | None | — | ASTM D2203 |
| Tensile Strength | 250.0 | psi | ASTM D412 |
| UV Rating (after 2500 hours) | No discoloration or change in appearance | — | ASTM G154 |
| VOC | max. 18 | g/L | EPA Method 24 |
| Low Temperature Flexibility | -90.0 | °F | Internal Method |
| High Temperature Flexibility (for Short P Periods) | 425.0 | °F | Internal Method |
| Tack Free Time (at 77°F, 50% RH) | max. 1 | hour | Internal Method |
| Cure Rate (Bead, in 24 hours) | 0.25 | inch | Internal Method |
| Skin Time (at 77°F, 50% RH) | max. 20 | minutes | Internal Method |
| Elongation (at Break) | 450.0 | % | — |
| Lap Shear | 325.0 | psi | — |
Regulatory & Compliance
- Specifications
XtraBond® 9500SL meets or exceeds the requirements of ASTM C920 Type S Grade P Class 25, Use T and M.
Packaging & Availability
- Packaging Type
- Packaging
- Cartridges
- Pails
- Drums
Storage & Handling
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container.
- Shelf Life
- Cartridges/sausages, use within 10 months from date of manufacture.
- Pails/drums, use within 6 months from date of manufacture.