Mascara with PERMETHYL 284C
Formulation
| Name | Ingredient | Supplier | % |
|---|---|---|---|
| Phase C | |||
Lipocol S Stearyl Alcohol | Stearyl Alcohol | 9 | 2.00 |
Permethyl 284C Polyisobutene and Mixed Alkanes | Polyisobutene and Mixed Alkanes | 11 | 4.00 |
Phenoxyethanol Phenoxyethanol | Phenoxyethanol | — | 1.00 |
Dow Corning 345 Fluid Cyclomethicone | Cyclomethicone | 5 | 5.00 |
Dow Corning 5225C Formulation Aid Cyclopentasiloxane (and) PEG/PPG-18/18 Dimethicone | Cyclopentasiloxane (and) PEG/PPG-18/18 Dimethicone | 5 | 1.00 |
Beeswax (White) Beeswax | Beeswax | — | 8.00 |
Stearic Acid Stearic Acid | Stearic Acid | 9 | 2.00 |
Arlacel 165 Glyceryl Stearate (and) PEG-100 Stearate | Glyceryl Stearate (and) PEG-100 Stearate | 10 | 2.00 |
Ganex V-220 VP/Eicosane Copolymer | VP/Eicosane Copolymer | 4 | 4.00 |
Carnauba Wax #1 Copernicia Cerifera (Carnauba) Wax) | Copernicia Cerifera (Carnauba) Wax) | 8 | 4.00 |
Propylparaben Propylparaben | Propylparaben | 4 | 0.20 |
| Phase A | |||
Deionized Water Deionzed Water | Deionzed Water | — | 46.25 |
Keltrol F Xanthan Gum | Xanthan Gum | 1 | 0.15 |
Veegum HV Granules Magnesium Aluminum Silicate | Magnesium Aluminum Silicate | 2 | 0.55 |
Dissolve NA-2 Disodium EDTA | Disodium EDTA | 3 | 0.05 |
Methylparaben Methylparaben | Methylparaben | 4 | 0.30 |
Triethanolamine, 99% Triethanolamine | Triethanolamine | 5 | 0.50 |
Butylene Glycol Butylene Glycol | Butylene Glycol | 6 | 1.00 |
| Phase B | |||
Black Iron Oxide C7133 (50% dispersed in Butylene Glycol) Iron Oxides (and) Butylene Glycol | Iron Oxides (and) Butylene Glycol | 7 | 18.00 |
Preparation:
Procedure
In a suitable kettle, combine the Phase A ingredients one a time.
Mix until all are completely dissolve.
When Phase A are completely dissolve, heat to 75°C with a propeller
mixer.
When Phase A reach the temperature of 75°C, add the Phase B Black Iron
Oxide disperse in 50% Butylene Glycol. Mix well.
In a separate vessel, weigh the Phase C and begin heating to 80° – 85°C.
Mix until all the waxes are completely melted and dissolved.
When Phase C is at 80° – 85°C and uniform, slowly add to Phase A&B;
with adequate mixing. Mix for 15 minutes and begin slow cooling.
Continue mixing the batch with a good agitation. When batch begins to
thicken, switch to side wiper or paddle mixing. Continue cooling to 25°C
When batch is at room temperature, stored in appropriate containers.
Notes:
Suppliers
1 Kelco 2 RT Vanderbilt 3 Akzo Noble 4 ISP 5 Dow Chemical
6 Ruger Chemical 7 LCW 8 Ross 9 Lipo Chemicals
10 Uniqema Americas 11 Preperse Inc. 12 Symrise
- Markets
- Applications
- Application Format
- Color Cosmetic Applications
