Brands

OC-390™ is recommended as rheological additive in oil based fluids and drilling muds. It is suitable for use in low aromatic oils and synthetic solvents. In addition to imparting excellent rheological properties, OC-390™ increases the carrying capacity and hole cleaning capabilities of the mud. Additionally, temperature and emulsion stability will be increased and fluid loss decreased.

RM-1012™ is a Low End Rheological Modifier is a high efficiency viscosity modifier/booster for all invert fluids, including synthetics RM-1012™ enhances rheology and stability of both invert and all-oil drilling fluids, with an emphasis on low end rheology increase. This allows LEM to provide excellent anti-settling properties for stored fluids and low end modification for fluids requiring low shear viscosity.

PecoBead 150™ lubricant additive is a proprietary blend of highly active copolymer beads in an environmentally friendly carrier fluid. It is used as a drilling fluid lubricant where ease of addition is needed and prevents the possibility of spillage of dry beads at the rig floor as a possible safety benefit.

LA-200™ is an amine treated lignite and filtrate control additive for non-aqueous fluids especially invert emulsions. It is compatible with diesel, esters, olefins and mineral oils typically used as drilling fluid base oils.

PecoSeal 306™ is a unique formula of carbon base material that has a selective particle distribution in order to reach the most optimal distribution. This material is used as bridging agent or plugging in porous formations. PecoSeal 306™ is thermally stable and non-expansible; it has a neutral pH and will not affect adversely the properties of the mud.

Pecomul 500-D™ is a specially formulated amido imidazoline product that is blended with a friendly solvent. Pecomul 500-D™ is a concentrated blend that promotes rapid oil wetting of drill solids and barite in and between synthetic oils, ethers, esters, poly-olefins and internal olefins as well as in calcium or sodium brines.

RD-220™ is a freely flowing multi-component blend prepared for combating lost circulation in drilling fluids. RD- 220™ is effective in a range of fracture plugging and is used as a maintenance treatment and higher addition rates when significant mud loss occurs. RD-220™ can be used for all invert fluids, including synthetics and in fresh and saltwater mud.

PecoBead 400™ is a multi-phase lubricant that is designed to decrease the co-efficient of friction in all water- base drilling fluids. The PecoBead 400™ decreases the coefficient of friction that reduces torque, drag and the potential for differential sticking in the wellbore.

RD-600™ is a proprietary blend of acid soluble minerals and polymers designed to help bridge and seal a wide range of fracture sizes in a productive zone where acid solubility is required. RD-600™ is compatible in all completion fluids, from fresh water to bromide brines.

PEG-503™ is a proprietary, multi-blend product designed to plug loss circulation zones with fine to medium fractures. PEG-503™ is easily mixed with conventional rig equipment. PEG-503™ is designed to be used in water or oil based drilling fluids. PEG-503™ produces a very thick, tough cake which resists washing away once drilling resumes. Normal quantities required are 7ppb, when severe losses are found add 15 - 20 ppb.

Pecomul 350™ is an invert mud emulsifier and wetting agent comprised of secondary emulsifiers for synthetic based drilling fluids systems. Pecomul 350™ is designed using low aromatic base oils.

TRL-100™ is a unique material designed to be used as loss circulation material and as seepage agent. Its particle size distribution is an important characteristic of this product.