Brands

RD-220™ is a freely flowing multi-component blend prepared for combating lost circulation in drilling fluids. RD- 220™ is effective in a range of fracture plugging and is used as a maintenance treatment and higher addition rates when significant mud loss occurs. RD-220™ can be used for all invert fluids, including synthetics and in fresh and saltwater mud.

Pecomul 100™ is an invert mud emulsifier system comprised of oxidized and modified tall oil for diesel based drilling fluids.

PecoBead 150™ lubricant additive is a proprietary blend of highly active copolymer beads in an environmentally friendly carrier fluid. It is used as a drilling fluid lubricant where ease of addition is needed and prevents the possibility of spillage of dry beads at the rig floor as a possible safety benefit.

LA-200™ is an amine treated lignite and filtrate control additive for non-aqueous fluids especially invert emulsions. It is compatible with diesel, esters, olefins and mineral oils typically used as drilling fluid base oils.

Pecomul 350™ is an invert mud emulsifier and wetting agent comprised of secondary emulsifiers for synthetic based drilling fluids systems. Pecomul 350™ is designed using low aromatic base oils.

GILSON 365™ is a natural gilsonite with ash content less than 1.1%. It is used for filtrate loss control and gives excellent shale control and stability while drilling. Because GILSON 365™ has a large molecular weight distribution and a high molecular weight, the softening point is high compared to other types of polymers, which allows it to soften or deform as it nears its softening point instead of completely melting into a low-viscosity liquid. Even when GILSON 365TM is 20 degrees above its softening point, it is still a high-viscosity liquid.

RM-1012™ is a Low End Rheological Modifier is a high efficiency viscosity modifier/booster for all invert fluids, including synthetics RM-1012™ enhances rheology and stability of both invert and all-oil drilling fluids, with an emphasis on low end rheology increase. This allows LEM to provide excellent anti-settling properties for stored fluids and low end modification for fluids requiring low shear viscosity.

Pecomul 300™ is an invert mud emulsifier and wetting agent comprised of secondary emulsifiers for diesel based drilling fluids systems.

RD-600™ is a proprietary blend of acid soluble minerals and polymers designed to help bridge and seal a wide range of fracture sizes in a productive zone where acid solubility is required. RD-600™ is compatible in all completion fluids, from fresh water to bromide brines.

OC-390™ is recommended as rheological additive in oil based fluids and drilling muds. It is suitable for use in low aromatic oils and synthetic solvents. In addition to imparting excellent rheological properties, OC-390™ increases the carrying capacity and hole cleaning capabilities of the mud. Additionally, temperature and emulsion stability will be increased and fluid loss decreased.

TRL-100™ is a unique material designed to be used as loss circulation material and as seepage agent. Its particle size distribution is an important characteristic of this product.

PecoBead 400™ is a multi-phase lubricant that is designed to decrease the co-efficient of friction in all water- base drilling fluids. The PecoBead 400™ decreases the coefficient of friction that reduces torque, drag and the potential for differential sticking in the wellbore.