company tower banner
Prime Source Company Logo

Flumioxazin 51 WDG™

1 of 1 products in this brand
Flumioxazin 51 WDG™ is a pre-emergent and early post-emergent herbicide for use in and around ornamental woody shrubs, deciduous trees and conifers grown outdoors in containers or in the field (in ground), to maintain bare ground non-crop areas. Can also be applied to labeled dormant warm-season turf types for pre-emergent and early post-emergent control of labeled weeds. Tank mixing with other pre and post-emergent herbicides may provide broader spectrum weed control. Flumioxazin 51WDG Select™ is also labeled for use as a fast-acting contact herbicide for the control of selected aquatic weeds including submerged, emerged and floating species. Depending on type of aquatic weed, applications can be made as a surface spray or sub-surface application.

Functions: Herbicide

Herbicide Target Species: Broadleafs, Grasses

HRAC/WSSA Group: 14

Application Technique: Aerial Application, Ground Soil Applied, Post-Emergence, Pre-Emergence, Sprayers

    Knowde Enhanced TDS

    Identification & Functionality

    Chemical Family
    HRAC/WSSA Group
    Agrochemical Functions
    Technologies
    Active Ingredients
    Flumioxazin: 2-[7-flouro-3,4-dihydro-3-oxo-4-(2-propynyl)-2H-1,4-benzoxazin-6-yl]-4,5,6,7- tetrahydro-1H-isoindole-1,3(2H)-dione 51.0%
    Other Ingredients 49.0%
    Total 100.0%

    Features & Benefits

    Benefits
    • Selective pre- and early post-emergent control of grass and broadleaf weeds
    • Broad-spectrum control of over 100 tough weeds
    • Fast-acting, long residual control
    • Flexible application options
    • Doesn’t volatilize and move off target.
    • Unique mode of action.
    • Excellent tank-mix partner with non-selective and other herbicides.
    • Exceptional value

    Applications & Uses

    Herbicide Target Species
    User Safety Recommendations

    Users should:

    • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
    • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
    Directions For Use
    • It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.
    • READ ENTIRE LABEL. USE STRICTLY IN ACCORDANCE WITH PRECAUTIONARY STATEMENTS AND DIRECTIONS, AND WITH APPLICABLE STATE AND FEDERAL REGULATIONS.
    • DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation.

    Properties

    Physical Form

    Regulatory & Compliance

    Certifications & Compliance

    Safety & Health

    Precautionary Statements

    Hazards to Human and Domestic Animals - Harmful if absorbed through skin. Harmful if inhaled. Avoid contact with skin, eyes or clothing. Avoid breathing dust or spay mist. Wash thoroughly with soap andwater after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove and wash contaminated clothing before reuse.

    Personal Protective Equipment - Applicators and other handlers must wear:

    • Long-sleeved shirt and long pants
    • Chemical-resistant gloves made of any waterproof material.
    • Socks and Shoes
    Hazards

    Environmental Hazards:

    • This product is toxic to non-target plants and aquatic invertebrates. DO NOT apply directly to water, to areas where surface water is present, or to intertidal areas below themean high water mark. Drift or runoff may be hazardous to non-target plants and aquatic organisms in neighboring areas. DO NOT apply where runoff is likely tooccur. DO NOT apply when weather conditions favor drift from treated areas. DO NOT contaminate water when disposing of equipment washwaters or rinsate.
    • This pesticide is toxic to plants and must be used strictly in accordance with the drift and run-off precautions on this label in order to minimize off-site exposures.
    • Under some conditions this product may have a potential to run-off to surface water or adjacent land. Where possible, use methods which reduce soil erosion,including no till, limited till and contour plowing; these methods also reduce pesticide run-off. Use of vegetation filter strips along rivers, creeks, streams, wetlands or on the downhill side of fields where run-off could occur will minimize water run-off.
    • Treatment of aquatic weeds can result in oxygen loss from decomposition of dead weeds. This loss can cause fish suffocation. Therefore, to minimize this hazard, treat 1/3 to 1/2 of the water area in a single operation and wait at least 10 to 14 days between treatments. Begin treatment along the shore and proceed outwards in bands to allow fish to move into untreated areas. Consult with the State agency with primary responsibility for regulating pesticides before applying to public waters to determine if a permit is needed.

    Physical or Chemical Hazards

    Do not mix or allow coming into contact with oxidizing agents, hazardous chemical reaction may occur. 

    Storage & Handling

    Storage and Disposal
    • DO NOT contaminate water, food or feed by storage, disposal or cleaning of equipment.
    • PESTICIDE STORAGE - Keep pesticide in original container. Store in a cool, dry, secure place. DO NOT put formulation or dilute spray solution into food or drink containers. DO NOT contaminate food or foodstuffs. DO NOT store or transport near feed or food. Not for use or storage in or around the home. For help with any spill, leak, fire or exposure involving this material, call day or night 1-877-250-9291.
    • PESTICIDE DISPOSAL - Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.
    • CONTAINER HANDLING - Non-refillable container.DO NOT reuse or refill this container. Offer for recycling, if available. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling, if available or puncture and dispose of in a sanitary landfill.