Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Dosage
Addition rates of 1-5% are recommended depending on application and level of protection required.
Typical resistivity at 2% addition rate in polyethylene: -- 1 x 10¹⁰ OHMS after 2 weeks
Properties
- Physical Form
- Appearance
- Clear colourless pellets
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Carrier Resin | Polyethylene | — | — |
| Compatibility | Polyolefin | — | — |
| Heat stability | 240.0 | °C | — |
| Density | 0.986 | g/cm³ | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Regulatory Compliance Statement
The above mentioned masterbatch when used at the recommended levels is suitable for use in materials intended for use in contact with foodstuffs and in children’s toys under the following regulations: -
- Is manufactured using pigments or additives which are in accordance with:
- European Resolution AP (89) 1
- Recommendation IX of the BfR for coloring plastics
- Listed under FDA 21 CFR 178.3297
- Is manufactured using pigments or additives which are compliant to –
- EN71-3 Toy regulation
- Is based on a polymer carrier that is compliant with: -
- EU regulation EU No 2023/2006/EC as amended
- FDA paragraph 21 CFR 177.1520 (olefin polymers)
- Is manufactured using pigments or additives which are in accordance with: