Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Adhesive
- Permanent Acrylic
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features & Benefits
- Quality raw materials for long life and durability
- Fine textured film improves traction in both wet and dry areas.
- Easy installation, simply position, peels off backing paper, and applies to a clean, dry, oil free surface
- Low profile reduces trip hazards
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Applications
- Pro® 17 is a premium vinyl anti-skid tape used in a wide variety of applications from stairs, to boats, to bookshelves. Pro® 17 is a calendared film, characterized by moderate tensile strength, high elongation and good tear strength. Calendaring has built-in stresses that are a common cause of film shrinkage and affect dimensional stability.
- Pro® 17 is designed for indoor non-skid applications that require long term anchorage to a wide variety of flat surfaces. It has been successfully used in applications such as showers and tubs.
- Latex Free
- Must be applied to a smooth surface
- Permanent use only
- Solvent Resistance Recommendations: Water, 10% Salt Water, Bleach, 1% Sodium Hydroxide, Diesel Fuel, Hydraulic Fluid, 50% Anti-freeze in Water, Mineral Spirits, 99% IPA, Unleaded Gasoline
- Solvent Resistance Not Recommended: Trichloroethylene, 25% Sulfuric Acid, MEK
- Surface Compatibility
Painted Wood, Painted Metal, Sealed Concrete, Fiberglass.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tack (Pastc-6, Rolling Ball Tack) | max. 5 | inch | — |
| Adhesive Thickness | 18.0 | Mils | — |
| Backing Thickness | 2.0 | Mils | — |
| Liner Thickness | 7.0 | Mils | — |
| Peel Adhesion (24 Hr. Dwell, Pstc-101, Stainless Steel) | 75.0 | Oz/In | — |
| Peel Adhesion (24 Hr. Dwell, Pstc-101, Powder Coated Surfaces) | 55.0 | Oz/In | — |
| Peel Adhesion (24 Hr. Dwell, Pstc-101, Polyethylene) | 25.0 | Oz/In | — |
| Coefficient Of Friction (Dry Rubber) | 1.05 | — | Astm D1894 |
| Coefficient Of Friction (Wet Rubber) | 1.06 | — | Astm D1894 |
| Coefficient Of Friction (Dry Leather) | 0.27 | — | Astm D1894 |
| Coefficient Of Friction (Wet Leather) | 0.9 | — | Astm D1894 |
| Application Temperature | min. 50 | °F | — |
| Service Temperature | -20 To 150 | °F | — |
Storage & Handling
- Storage Recommendations
- 72˚F, 50% Relative Humidity