Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Shines
- Formulated to exhibit a tight, dense film that is extra tough, yet flexible
- Provides spectacular, scuff-resistant gloss for frequently burnished floors
- Saves on costly labor
- Easy to apply with minimum mop drag
- Fast dry time, quick recoatability
- Easily repairable
- Seals floor totally, to simplify product application
- New coats of finish bond perfectly with floor surfaces
- With proper maintenance, tough enough to last more than a year without stripping, while retaining its original deep luster.
Applications & Uses
- Markets
- Applications
- Application Area
- Application
For use on most composition and hard surface floors Asphalt, Ceramic Tile, Concrete, Marble, Quarry Tile, Rubber, Slate, Stone, Terrazzo, Vinyl, Vinyl Asbestos, schools, hospitals, nursing homes, offices hotels, recreation centers, kitchens, restaurants, corridors
- Directions
Thoroughly clean the floor and remove all old wax or finish using a solution of a concentrated wax and finish stripper. Rinse well with clear water and allow to dry. Apply 2 coats of sealer. Wait 30 minutes between coats. Apply the finish using a lamb's wool applicator or a cotton or rayon mop. With ultra high speed/propane burnishing machine, burnish between coats for optimum performance.
Properties
- Physical Form
- Appearance
- Milky liquid
- Odor
- Characteristic
- Specifications
Value | Units | Test Method / Conditions | |
Coverage | 3000.0 | sq.ft/gallon | — |
Dry Time | 20 - 30 | minutes per coat | — |
Flash Point | Non-flammable | — | — |
pH | 800.0 | — | — |
Solids | 18.0 | % | — |
Safety & Health
- Precautions
Keep out of reach of children. Keep out of eyes. Avoid prolonged skin contact. Harmful if swallowed. To avoid contamination, do not return used material to original container. Rinse empty container with water and discard. This product is intended for industrial and commercial use and storage by trained service persons only. Manufacturer will not be responsible for any injury, loss, or damage, if product is used in any manner not in compliance with label directions or if precautions are not observed.
- First Aid
- Eyes: Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses and continue flushing. Immediately get medical attention.
- If Swallowed: Do not induce vomiting or give anything by mouth to an unconscious person. Seek medical attention.
- On Skin: Remove and wash contaminated clothing before use. Flush contaminated skin with plenty of water. Get medical attention if irritation persists.
Packaging & Availability
- Packaging
- 4- 1 gallons
- 5 gallon pail
- Drums